magnumHP
Junior Member
- Joined
- Feb 21, 2017
- Posts
- 4
- Reaction score
- 0
- Ram Year
- 2000
- Engine
- 318 magnum
hello all! im getting ready to build my 318 magnum. i have a basic knowledge for these engines, but would like some others opinions on where to go.
so a little about the build. its for a 2000 qcsb. its a 4x4 truck with a 5" lift. i use the truck for everything, playing in the mud, beatin up other cars and trucks on the street, hauling, towing, etc!
my goal is to be as close to 500hp to the wheels as possible! ive been looking at the following parts over at Hipotek.
hughes air gap intake
hyd roller cam 230/234 .506/.506 110lsa
eagle forged I beam connecting rods
Wiseco Pro Tru Piston SB Chrysler 318 Flat Top Pistons for 3.940 bore size
Magnum Indy 'X' Heads W/ 2.02"/1.620" Stainless Steel Mopar Performance Valves.
obviously going to need to figure out still what rocker arms i need, push rods, trans work etc.
my question is, can the stock crank handle the power? does my current list look like a good start/combination?
feedback is greatly appappreciated!
so a little about the build. its for a 2000 qcsb. its a 4x4 truck with a 5" lift. i use the truck for everything, playing in the mud, beatin up other cars and trucks on the street, hauling, towing, etc!
my goal is to be as close to 500hp to the wheels as possible! ive been looking at the following parts over at Hipotek.
hughes air gap intake
hyd roller cam 230/234 .506/.506 110lsa
eagle forged I beam connecting rods
Wiseco Pro Tru Piston SB Chrysler 318 Flat Top Pistons for 3.940 bore size
Magnum Indy 'X' Heads W/ 2.02"/1.620" Stainless Steel Mopar Performance Valves.
obviously going to need to figure out still what rocker arms i need, push rods, trans work etc.
my question is, can the stock crank handle the power? does my current list look like a good start/combination?
feedback is greatly appappreciated!