Blackpearl35
Junior Member
Hey guys just thank you for reading my post could really use the help. I have a ram 1500 5.7 hemi with 130k miles..
I have just replace the cam shaft and lifters. And now I am having an issue where cylinder 1,3,5,7 are insufficient ionization code
I have check every connection and went over my timing multiple times where I did the reassemble.
I have check my spare plugs and im only getting 0.18 volts to the coil and injector harness
Is there something I am missing?
Are the injector harness not getting enough power?
If you guys have any trouble shooting or idea much appreciated.
I have just replace the cam shaft and lifters. And now I am having an issue where cylinder 1,3,5,7 are insufficient ionization code
I have check every connection and went over my timing multiple times where I did the reassemble.
I have check my spare plugs and im only getting 0.18 volts to the coil and injector harness
Is there something I am missing?
Are the injector harness not getting enough power?
If you guys have any trouble shooting or idea much appreciated.