Medpilot
Member
Completed my lift project the other day.
4" BDS lift with Bilsteins 5100 set a 0
Fox 2.0 rear shocks w/ 2" spacers
Wheels are Raceline Assults 20x9 with a +18 offset with a 30mm hub adapter making the total offset -12
I had to use a hub adapter because the wheels came from my Grand Cherokee which has a different lug pattern. Plus I wanted a more aggress stance.
Tires are Nitto Trail Grapplers 295/65r20
Total lift came out to be 5+ inches. More than I expected for the front.
Front started out at 36.5" Rear 39.5" (stock wheels)
After was 41.8" all around (stock wheels)
I was hoping for at least an 1 inch of rake. I may go with 3" coils in the rear. Or just put some AirLift bags in the rear coils. Not sure what direction I want to go yet.
Had all the work done at BDM Customs in Tempe AZ. Highly recommend this place.
Feel free to leave comments questions...
4" BDS lift with Bilsteins 5100 set a 0
Fox 2.0 rear shocks w/ 2" spacers
Wheels are Raceline Assults 20x9 with a +18 offset with a 30mm hub adapter making the total offset -12
I had to use a hub adapter because the wheels came from my Grand Cherokee which has a different lug pattern. Plus I wanted a more aggress stance.
Tires are Nitto Trail Grapplers 295/65r20
Total lift came out to be 5+ inches. More than I expected for the front.
Front started out at 36.5" Rear 39.5" (stock wheels)
After was 41.8" all around (stock wheels)
I was hoping for at least an 1 inch of rake. I may go with 3" coils in the rear. Or just put some AirLift bags in the rear coils. Not sure what direction I want to go yet.
Had all the work done at BDM Customs in Tempe AZ. Highly recommend this place.
Feel free to leave comments questions...
She looks sharp!
