Abrams117
Junior Member
- Joined
- Nov 16, 2022
- Posts
- 21
- Reaction score
- 15
- Location
- Kansas City Metro
- Ram Year
- 2022
- Engine
- Hemi 5.7
Got my 2022 Classic RCSB lifted recently.
- 6" Zone kit with 5" rear springs and Fox shocks. Originally had the 3" rear springs but it ended up being way nose high with the coilovers.
- Fox Factory Race Series 2.5 DSC Coilovers on the front that I think are giving me 8" of lift, may eventually get it adjusted down an inch some day. The angle of the front CVs worry me a little.
- Core 4x4 Front upper control arms in blue with the FK rod ends.
- Core 4x4 tier 3 adjustable rear control arms and trackbar in blue.
- Powerstop Z36 brakes/rotors front and rear.
- Method MR701 17x9 -12 wheels with Mickey Thompson Baja Boss A/T 37x12.50 tires.
- Full size spare strapped down in the bed with stock spare removed.
- Got the tire size calibrated with AlfaOBD.
Got some concerning noise on the highway which I'm fairly postive is the rear driveshaft due to the angle. Eventually I will see if I can get a custom shaft made and/or have the rear control arms adjusted. Luckily this isn't my daily driver. Thanks to @Nick@GotExhaust for helping me with the parts!
- 6" Zone kit with 5" rear springs and Fox shocks. Originally had the 3" rear springs but it ended up being way nose high with the coilovers.
- Fox Factory Race Series 2.5 DSC Coilovers on the front that I think are giving me 8" of lift, may eventually get it adjusted down an inch some day. The angle of the front CVs worry me a little.
- Core 4x4 Front upper control arms in blue with the FK rod ends.
- Core 4x4 tier 3 adjustable rear control arms and trackbar in blue.
- Powerstop Z36 brakes/rotors front and rear.
- Method MR701 17x9 -12 wheels with Mickey Thompson Baja Boss A/T 37x12.50 tires.
- Full size spare strapped down in the bed with stock spare removed.
- Got the tire size calibrated with AlfaOBD.
Got some concerning noise on the highway which I'm fairly postive is the rear driveshaft due to the angle. Eventually I will see if I can get a custom shaft made and/or have the rear control arms adjusted. Luckily this isn't my daily driver. Thanks to @Nick@GotExhaust for helping me with the parts!