No Tow Hitch

[Warlock2024]

U need to research and make sure u get the correct one for your truck since Mopar site does not show yer trim. I would bet it fit but u need to get correct fitment for your specific trim

Got it! Just so I'm clear, a Class III Bumper Hitch is not actually a hitch, more of a hole cut out to add one? This is my 3rd truck and never had one without a hitch on it so I just want to be sure.

 

[turkeybird56]

Thank you!!

Mopar shows not fit Warlock. They got a separate hitch setup where you may have to but the frame mount kit and receiver section https://store.mopar.com/oem-parts/m...meT0yMDI0JnQ9d2FybG9jayZlPTMtNmwtdjYtZmxleA==

 

[turkeybird56]

Above looks like u need to fit yer Warlock specific but u gotta look and verify and make sure if u get it u get it with receiver part also.

Good luck on all that

 

[turkeybird56]

Got it! Just so I'm clear, a Class III Bumper Hitch is not actually a hitch, more of a hole cut out to add one? This is my 3rd truck and never had one without a hitch on it so I just want to be sure.

The Hitch is the bar with metal ball attached: That U slide into the receiver. Mounted on the truck.

The receiver is the entire assembly with the square hole mounted to truck u slide the ‘hitch’ into.

The receiver is the url I posted in post #22.

U need the entire receiver with the hitch receiver attached there are 2 pics in the mopar part see the one with the square hitch slide as part of receiver group. The square part in the pic.

 

[turkeybird56]

The Hitch is the bar with metal ball attached: That U slide into the receiver. Mounted on the truck.

The receiver is the entire assembly with the square hole mounted to truck u slide the ‘hitch’ into.

The receiver is the url I posted in post #22.

U need the entire receiver with the hitch receiver attached there are 2 pics in the mopar part see the one with the square hitch slide as part of receiver group. The square part in the https://duckduckgo.com/y.js?ad_doma...650553B4B6473021744253AAD656A&ID=DevEx,5087.1

 

[turkeybird56]

https://www.amazon.com/Reese-Towpower-21536RAK-Standard-Starter/dp/B005STRN3U/ref=asc_df_B005STRN3U?tag=bngsmtphsnus-20&linkCode=df0&hvadid=80539344142736&hvnetw=s&hvqmt=e&hvbmt=be&hvdev=m&hvlocint=&hvlocphy=&hvtargid=pla-4584138872175654&psc=1

Remember gotta match hitch ball and slide to match trailer. They usually start at 5K capacity and move up. I have a 7,500 lb setup which matches my stock trailer total capacity plus 20% ability for safety. Not want a lower slide compared to wat I pull.

 

[Warlock2024]

Thanks again for all your help! And, thank you for your service!!