Procomp ProRunner adjustables and 3 inch PA body!

[Tfrizz80]

Didn't want to wait for Bilsteins up front so thought I'd try the procomp for the front level. There wasn't a lot of info about them out there so took a gamble. Truck is 2012 crew 4x4 with 3.92 gears. I live in south east texas. Roads are horrible so u feel every bump. Truck rides better than stock. I feel more control on the road when hitting all the bumps and potholes. Truck sits level with the shock set at 2.75. You only have 2 settings...stock or 2.75. With the body lift it looks great but can't wait to go higher. I need some wheels and tires before then.

 

[camodown]

Will look good with some bigger meats

 

[LB3711]

not bad

 

[Tfrizz80]

thanks...If I get a 6 inch suspension kit soon I'll wait and go with 37s. If not I'll throw some 35s on it and make do for a while.

Sent from my SCH-I545 using Tapatalk

 

[argray90]

Looks good!

 

[BigSexyBlue05]

Didn't want to wait for Bilsteins up front so thought I'd try the procomp for the front level. There wasn't a lot of info about them out there so took a gamble. Truck is 2012 crew 4x4 with 3.92 gears. I live in south east texas. Roads are horrible so u feel every bump. Truck rides better than stock. I feel more control on the road when hitting all the bumps and potholes. Truck sits level with the shock set at 2.75. You only have 2 settings...stock or 2.75. With the body lift it looks great but can't wait to go higher. I need some wheels and tires before then.View attachment 26511

You already have the 3" body lift on in this picture?

 

[Tfrizz80]

You already have the 3" body lift on in this picture?

Yes sir. Took me a couple days to do both by myself and with only hand tools and the factory jack lol. Had to rent a strut spring compressor but that it.

 

[Tfrizz80]

Put gap gaurds on to clean the engine bay clean or as clean as possible.

Sent from my SCH-I545 using Tapatalk

 

[Cruizer]

Looks great! Getting ready to throw my body lift on Friday. Any advice?

 

[Tfrizz80]

Looks great! Getting ready to throw my body lift on Friday. Any advice?

Bed body bolts were the hardest to get out. I had to use a long half inch drive extension to get down below the body so I could get leverage when braking them loose. Other than that directions were not the greatest but I made do.

 

[Cruizer]

I've noticed that reading through the instructions a couple times. The Sport front bumper is probably my biggest concern. Heard it's a ***** to get off.

 

[argray90]

I've noticed that reading through the instructions a couple times. The Sport front bumper is probably my biggest concern. Heard it's a ***** to get off.

It's not too bad when we took off Ultra's just needed a second set of hands to help lower it.

 

[Tfrizz80]

Ya its not bad. The sport bumper cover is held on buy 2 metal screws in the wheel well. I think 2 plastic ones in that location also. One of the metal ones is behind the fender. It's not bad tho. I think 4 bolts at the bottom then cover comes off. 3 main bumper bolts on each side and that's it.

 

[WhiteExpress]

You skipped leg day bro! haha!

I'm liking the increased ride height.

 

[skirider]

Did all the body lines line up after the body lift install. They have brackets to relocate the bumpers?

Sent from my DROID BIONIC using Tapatalk

 

[john.burns19]

I have the procomp adjustables as well. they are pretty awesome and they actually lift it the full 2.75 inches. I love them

 

[Tfrizz80]

Did all the body lines line up after the body lift install. They have brackets to relocate the bumpers?

Sent from my DROID BIONIC using Tapatalk

Yes I have sport front bumper and everything line up like factory

 

[Tfrizz80]

I have the procomp adjustables as well. they are pretty awesome and they actually lift it the full 2.75 inches. I love them

Yours looks great also!!

 

[dirtridersr]

any 4wd vibration when set at 2.75? I know some of the guys with the bilstiens set at 2.8 were having that problem.

 

[Tfrizz80]

I haven't put it in 4th much but I haven't felt anything so far.