- Joined
- Dec 1, 2013
- Posts
- 12,803
- Reaction score
- 12,500
- Location
- Bristol , Tn.
- Ram Year
- 2014 4X4 QC Express 6 speed auto 355 differentials
- Engine
- 5.7 Hemi
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
The picture is fine on my end !Sorry pic came out a little fuzzy the part number is 68105821AB
The picture is fine on my end !
Thanks Rick , PM me and I'll give you my shipping address , ya know so you can just send it to me ! Lol !
How much did you pick up the module for?
Sent from my HTC One using Tapatalk
You need the compass module that is located behind the overhead console which your truck didn't come with. I have not heard of just plugging in a shark fin antenna in a RA2 to make it work. If you can it's news to me. If you had an RA1 to start with you will need to run the wires to the correct pins on the drivers side that go down the drivers side A pillar behind the dash to hook up the compass module. I just did it to my friends but we got lucky and got the wiring harness out of a wrecked Bighorn and plugged it in. You cannot buy just the harness. All of the wiring is glued to the headliner and is sold as a unit. We installed the overhead console with homelink/ compass module because we happened to have one but you can install the basic compass module without homelink as well.. You will also need to activate the sales code CV2 in order for the homelink to show up if you add a compass module that has it. There are posts that tell you exactly where to run the wires. You just need to find them or find a harness. Very doable but you need to hook it all up.
Yes the compass worked. We did it last summer so I can't remember for sure but I am pretty sure it didn't show up in the radio until we added the sales code.