OP
OP
Sorry for the delayed update.
Checked front end links, turns out the driver side one had come a little loose, so retorqued that. Greased the front UCA ball joints which I hadn’t done yet (they did come greased from the factory though). Also, installed new Core 4x4 greasable rear end links.
But, I think the real culprit of the rattle may have been the MotoFab rear coil spacers. I swapped in some ICON 1.5” springs that had been sitting on my project bench for a few weeks. Haven’t heard or felt a rattle/jiggle since then even over hard bumps.
EDIT: The ICONs only netted me about 1” of lift though. So I might end up throwing in some 1/2” spacers. Any recommendations for 1/2” spacers that won’t rattle?
Checked front end links, turns out the driver side one had come a little loose, so retorqued that. Greased the front UCA ball joints which I hadn’t done yet (they did come greased from the factory though). Also, installed new Core 4x4 greasable rear end links.
But, I think the real culprit of the rattle may have been the MotoFab rear coil spacers. I swapped in some ICON 1.5” springs that had been sitting on my project bench for a few weeks. Haven’t heard or felt a rattle/jiggle since then even over hard bumps.
EDIT: The ICONs only netted me about 1” of lift though. So I might end up throwing in some 1/2” spacers. Any recommendations for 1/2” spacers that won’t rattle?
Last edited:
