Rear spacer drawing/measurements

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Wild one

Senior Member
Joined
Jan 17, 2016
Posts
14,061
Reaction score
24,379
Ram Year
14 Sport
Engine
5.7
You guys are the best!!

Thats why I like the forums!!

Just a heads up,i've never lifted a 4th Gen,but if you lower them,the passenger side almost always sits higher after lowering,usually a 1/4" or more difference between sides. Not sure it that might be the same if you lift one,but you might want to pay attention to how the truck sits afterwards and if it has an unacceptable lean,you might need to shim the low side slightly to match the high side if it does end up with a lean.
 
Last edited:
Top