CountryBoi
Junior Member
- Joined
- Nov 14, 2019
- Posts
- 2
- Reaction score
- 0
- Location
- Katy, tx
- Ram Year
- 2019 1500 classic
- Engine
- 3.6
Has anyone had any luck with installing Rockford Fosgate dsr1 along with idatalink Hrn-dsp-ch3 t harness.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I also have the dsr1 in my truck with the harness. It's the alpine system and the harness took all the signal that went to the factory amplifier eliminating it from the system, summing all the signals and sending them to my new amplifiers. I really wish it was an 8.1 channel instead of an 8.
How? It's only an 8 channel dsp. I'm using 4 channels for the front (wish I had 6 for 3 way active) 2 channels for the rear speakers and the last 2 to the subs.what do you wish was 8.1 channel? the DSR? I'm running 10 channels out of my DSR
How? It's only an 8 channel dsp. I'm using 4 channels for the front (wish I had 6 for 3 way active) 2 channels for the rear speakers and the last 2 to the subs.
Man im having this debate in my head right now. 300 bucks is a steal for this setup with harness except ive already ordered my PAC Ch41 R.2. But that is gonna require me to spend more money on a dsp. Im really thinking of sending it back but debating if the dsr1 is a good enough dsp compared to a dm-810 other than just the additional channels. But 300 vs about 750 is a big difference
ive got a xd400/4, zx200.2 and a jl hd750/1 for now. id like to run just one six channel but its what ive got on the shelf