Allan Jones
Junior Member
Hey guys this is the first time I've posted. I have a question about speakers. I have two Rockford Fosgate Punch 10s 500 watts rms with a punch 2 Channel 1000 watt RMS amplifier. I have 4 punch 6x9 75 Watts RMS with a punch 300 RMS 4 channel amplifier. I want to install Infinity Kappa Perfect 300M 75 watt rms in the dash with a Fosgate 150.
Now for the big question? I would really like to use the factory wiring for the speakers as I think 75 watts per speaker would not over do the factory wiring. But I run into a dilemma with the dash speakers are wired parallel with the front 6x9s. The infinities are 3.5 ohm. The p1692 Fosgate is 4 ohm. And I would actually be putting 6 75 watt RMS speakers on a four-channel Fosgate 300. do I need to replace the wiring on all the speakers and buy another two channel 150 for the Kappa's? If so what kind of mess would I be dealing with rewiring those dash speakers? Thanks for any help you can give.
Now for the big question? I would really like to use the factory wiring for the speakers as I think 75 watts per speaker would not over do the factory wiring. But I run into a dilemma with the dash speakers are wired parallel with the front 6x9s. The infinities are 3.5 ohm. The p1692 Fosgate is 4 ohm. And I would actually be putting 6 75 watt RMS speakers on a four-channel Fosgate 300. do I need to replace the wiring on all the speakers and buy another two channel 150 for the Kappa's? If so what kind of mess would I be dealing with rewiring those dash speakers? Thanks for any help you can give.