tire size question...again

[jdeere05]

Ok sorry to beat a dead horse guys..but I was going to do wheels and tires but lost the budget for the wheels so can only do tires...I have a 2" hbs level up front and 20" chrome clad wheels...now im looking into nitto terra grapplers 296/60/20 (34.45x12.36) or trail grapplers 295/65/20 (35.47x12.13). Will either of these fit on the stock wheel with the level with out clearance issues or will I need wheel spacers as well? And if so what size spacers?....thanks guys

 

[Bluesmoke91]

From what i have read over and over, you will need spacers to run stock 20s.

Sent from my DROID RAZR using Tapatalk

 

[jdeere05]

So what size wheel spacers are going to work? And will they mess anything up?

 

[mattman_13]

1/4" - no.

It's the width that is the problem. The factory tires are pretty close to rubbing ucas already.
As long as it's a quality spacer you shouldnt have an issue. Don't buy cast cheap crap and there is a retaining ring on one stud on each hub. Be sure to remove that and clean the mounting surface so the spacers mount flush and torque to specs.

 

[jdeere05]

so then 1/4" and what is a good quality brand of spacer and where to get one?

 

[mattman_13]

I ran rough country with zero issues. I've got a set of 4 I'd sell cheap if you were interested.
Those are the only spacers I've had experience with however.