sandawilliams
Senior Member
- Joined
- May 29, 2012
- Posts
- 2,799
- Reaction score
- 5,528
- Location
- Pueblo West, Co.
- Ram Year
- 2021
- Engine
- 6.4 hemi
I began installing the total load control system yesterday. I have included pictures. I will post part two in a few days. Make sure you test each tubing fitting prior to putting dash and other parts back together. Use a spray bottle with a mixture of dish soap and water and test each connection. I found a leak at the compressor inlet that would have been a major problem if I had not tested prior to reinstalling things. It lost about 3 psi per hour but that is enough to make you continuously have to reinflate the bags as you tow long distances.