BBartow
Senior Member
- Joined
- Nov 18, 2013
- Posts
- 5,759
- Reaction score
- 3,393
- Location
- New Port Richey, Florida
- Ram Year
- 1995
- Engine
- 5.9L Magnum
I personally like the look of 2" level and 35's on these rigs.
What's DB?
drop bracket
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I personally like the look of 2" level and 35's on these rigs.
What's DB?
drop bracket
Oh gotcha. With IFS I find you don't need more 2" extra clearance really. For everything you're gonna do with IFS that's good enough. Heck with mine at stock height and a good set of tires I've gone through some nasty $h!t to get places I'm goin, like back woods boat launches.
I stripped mine too. I went to orileys and bought the Helicoil rethread kit. Haven't had an issue since.Guys I ****** up... went to change the thermostat and housing since the housing was leaking and a bolt broke off... tried drilling it but that's not happening cuz they aren't cutting the bolt.. guess I gotta grab a different kegger and toss it on...
Sent from my SM-S920L using Tapatalk
Mine was I believe a 3/8s and just use a steel drill bit a little bit smaller and screw the rethread down in the hole and twist the other way to break the tab off. the thread spring will not come out once it's in. And it'll thread like a new bolt.I wouldn't mind doing that if I could drill the ****** out lol pretty much just polished to top...
Sent from my SM-S920L using Tapatalk
Get to drilling lol its better than pulling the intake imoMine shows to be a 3/16" but I just can't get a cut on the old bolt.. broke off below flush so it has to be drilled...
Sent from my SM-S920L using Tapatalk
I did for about 45 mins with a new bit and only got maybe a 16th" ...Get to drilling lol its better than pulling the intake imo
Sent from my SM-G900V using Tapatalk
Damn.....good bolts ya got there.I did for about 45 mins with a new bit and only got maybe a 16th" ...
Sent from my SM-S920L using Tapatalk
Factory as far as I know... so probably ****** bitsDamn.....good bolts ya got there.
Sent from my SM-G900V using Tapatalk
Buy felpro from orileys. not dorman crap lolFactory as far as I know... so probably ****** bits
Anything else I need to do that job? I'll be using the Dorman kit from the zone..
Sent from my SM-S920L using Tapatalk
This one comes with all new bolts and all the rest.. I do like felpro though most of the ones I see are just the intake to head gasket or just the plenum gasket.. can't find the front and back intakeBuy felpro from orileys. not dorman crap lol
Sent from my SM-G900V using Tapatalk
This one comes with all new bolts and all the rest.. I do like felpro though most of the ones I see are just the intake to head gasket or just the plenum gasket.. can't find the front and back intake
Edit: for some reason now it shows up.. still want new bolts as I read they are tty (haven't double checked the write up by will tho )
Sent from my SM-S920L using Tapatalk
This one comes with all new bolts and all the rest.. I do like felpro though most of the ones I see are just the intake to head gasket or just the plenum gasket.. can't find the front and back intake
Edit: for some reason now it shows up.. still want new bolts as I read they are tty (haven't double checked the write up by will tho )
Sent from my SM-S920L using Tapatalk
Appreciate it.. hoping to have it on the road again this weekend cuz it'll be then before I will have time to do anythingI have some of the bolts I bought when I was going to do mine before I sold the truck. If I can find them, pay for shipping and they're yours. No use to me just sitting there lol