Jus Cruisin
Gearhead
- Joined
- Nov 6, 2017
- Posts
- 678
- Reaction score
- 560
- Ram Year
- 2019 Limited 4X4
- Engine
- E-torque hemi
Let's see..... Nothing......it's not in my driveway, yet. It's somewhere between Michigan and Florida
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
^^^. Your dealerships are open on Sunday ?
I waited too long. These are now on national backorder. Parts guy at Avondalemotors will try to get some anyway so we'll see.
Do you have a link for AvonDalemotors? Can’t seem to find it thru the usual search methods. Thank you
Sent from my iPhone using Tapatalk
https://www.amazon.com/gp/product/B07CM2HXFJ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Bought this 12 inch screen protector
Works great, 15 bucks
With the grills and liner and everything all in is about $1000 or so (CAD). So about $700 or so USD.
Just got my putco light blade/bar in the mail. Looking to install this evening if I still have some good posi-tap connectors left. This one supposedly has the beam/pipe of light as opposed to the old 'dots' of led in the older style bars.
View attachment 135362
Sorry to say they made the design under the tailgate so there's not a clean way to mount a light bar that I can see. The harness for the power latch and camera is directly in the way. You would have no visible choice other than to mount the bar below that wire harness and unfortunately the area is not flat. There are two odd bumps plus the 'latch' to release the wire harness door. That latch that releases the wire harness would have to be covered, period. So let's say that's not a big deal as you can remove this particular light bar from it's clips if you needed to remove the tailgate/harness for any reason. You still don't have any flat surface that stretches the length of the entire tailgate. Can't get any pictures to come out or I'd show you what I'm on about...I'm bummed but there's no way to mount a light bar to my OCD specs that I can see....maybe after I think on it for a few but I plan to return it and admit defeat at this point.Just got my putco light blade/bar in the mail. Looking to install this evening if I still have some good posi-tap connectors left. This one supposedly has the beam/pipe of light as opposed to the old 'dots' of led in the older style bars.
View attachment 135362