Wheel Spacers?

[Skubasteve!]

So, what are the quality name brands when it comes to spacers?

 

[chrisp2493]

So, what are the quality name brands when it comes to spacers?

BORA. They have a five week build time and are fairly expensive but well worth it. Made in the USA!

 

[matthewharrison]

1.5 inch supreme suspension hub centric spacers before and after picture. Has them on for about 6 months with no issue. Installed with blue loctite and torqued. I checked them when I rotated my tires about 5k miles after install and torque was still the same as the day I installed them.

Sent from my SAMSUNG-SM-G930A using Tapatalk

Oh this looks perfect, thanks for the pics!

 

[matthewharrison]

Nice trucks guys, appreciate all the response

 

[matthewharrison]

You must have this levelled too, where'd you get the side steps? @Tprearson515

 

[brianw0048]

You must have this levelled too, where'd you get the side steps? @Tprearson515

Looks like the factory w2w side steps to me.

 

[Tpearson515]

You must have this levelled too, where'd you get the side steps? @Tprearson515

Thanks, leveled with 2.5 front 1.5 rear and then a 1.5 body lift. Yes factory side steps that I painted for now until I buy ones a little more low profile

Sent from my SAMSUNG-SM-G930A using Tapatalk

 

[workd4it]

I have the black oem rims on my 16 expess. Does 1.75" cover studs or should I go 2" to be safe? thanks for any info.going bora for sure.

 

[Rugged]

I just put 1” spacers on my 2010 and there are pockets milled out of the back of the stock 20’s so deep I didn’t have to trum the studs at all. The studs stuck past the spacers 9/16” and the pockets were 3/4” . Here’s a pic of the stock rims backside so you can see the pockets. I’m not sure about your 2016 rims but I would take one off and measure to see. I wanted the bolt on hubcentric spacers so 1” was as small as I could go not getting full custom spacers.



Sent from my iPhone using Tapatalk