Okay so I'm having some issues with this thing, since the second day I installed it it has not come on at night, when you put it in reverse the screen "lightens" but no image comes up. It would always come on during the day time with no issue until a few days later it wouldn't come on at all, just "lighten" the screen when put in reverse but no image. So I thought maybe the ground wasn't good like stated before so I ran a ground to the frame, hooked it up, put my truck in reverse and it came on right away. Thought I fixed the issue so I went out that night put it in reverse, didn't come on just "lightened" the screen again and no image. Now it's not coming on during the day either. Just wondering if because I didn't hook the power wire up to the reverse bulb wire in the section of wiring from the bulb socket to wiring harness like the directions say to would be the cause? I tied the power into the reverse wire that's in the wiring harness with all the wires that goes to the plug going to the tail light plug. Sorry if that's hard to follow. That's the only thing I can think of being wrong besides a faulty camera. Any thoughts or help from past experience would be great.