All is working well, but I still cant seem to clear these DTC faults even though it's working now. Any reason why or something I need to do?
Yes I did change the "LED CHMSL Lamp Present" to yes after I was getting a DTC for that as well.
U112E - Lost Communication with Rear Cargo Camera
U0264...
Only because you posted this SitKneelBend and asked "ARE YOU SURE? DOUBLE AND TRIPLE CHECK" I went back and checked again.
You were right! Apparently I was actually using pins 14&15 looking at front instead of the back..or vice versa.
Once I had the right pins 24 and 25, that was it...
Thanks for the input. Yes that is the same pin location as I posted (front of plug vs. rear) I just needed to make sure. Out of ideas. The only thing I haven't checked is if the RCA cable is bad?
I am trying to add an aftermarket Cargo Camera to my 2017 Dodge Ram 5500 tradesman. I can not get an image to appear in the CargoCam button. Backup camera works fine.
This is what I have done.
Purchased and installed an 8.4 Stereo Upgrade with custom harness by MPGRIMM2 through a 3rd party...
The valentine one does indeed still save me from the occasional ticket. Not that I am going 100mph in a Dodge Ram 5500, but it's all the back roads where speed limits fluctuate and it's easy to miss the 55>35 sign in town. Most departments now use Ka band where I have traveled across the U.S...
I have used a mirror mount on all of my vehicles. The mirror stem on my 2017 Dodge Ram 5500 Tradesman is tapered, and therefore the mount slides down the stem and gets loose. I tried to tighten the allen screws tighter but ended up just breaking the mounting bar that was included. So I ended...
This was exactly the FIX! Tried it again and remote start worked perfectly. I’ve learned to let the vehicle sit for 30 minutes to make sure changes took. But didn’t know a drive and few key cycles would make a difference. THANK YOU!
Great. I will try the jumper again now that I have driven it. One other question.
Does it matter which setting in the CBC I/O Usage-Hood ajar switch if you are trying to use a jumper?
I have tried changing the resister settings to both 500ohm series & parallel and 1K parallel resistor in...
I saw this thread discussed and again I didn't find a definitive answer.
I have a 2017 Dodge Ram 5500 Dually 4x4 and have noticed it does not have the TPMS information screen in the cluster.
I read on here that many of the Commercial Trucks do not have TPMS at all and have TPIS instead.
I...
I will try that and see.
To clarify. You are saying try the wire jumper again from pin 1 & 2. (Not a resistor - which I current don't have my hands on one of those)
Hey Guys. Trying to add remote start to a 2017 Dodge 5500 Tradesman. I have read and read through all the forum posts about this, but still see conflicting information in regards to bypassing the hood switch.
Here's where I am at:
- I have purchased overlays for my current tipstart keys
-...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.