Daniel Ortiz
- Posts
- 68
- Reaction score
- 94
Latest activity Postings About
-
-
Once my part is in, there are no moving parts in that housing. So if it's in, it's in. I'd suspect some kind of blockage elsewhere or... -
Might just keep an eye on it and if it happens again you know the general RPMs and verify the gears. In the past was the AC on in...
-
yep I hear you. I really do love this truck and it sucks that I can't rely on a well rounded mechanic to help me figure this stuff out...
-
If you can do the eliminator the fluid is easy. Again, the videos and most of the writeup make it sound a lot more involved. Because...
-
I honestly did not check what gear I was in, but it was not revving high at all, it was actually driving normal if it wasn't for my...
-
I just drove 1.5hr trip today both ways. Approximately 60 miles each way. 50 miles on the interstate at 80 mph. Sustained temps on the...
-
Daniel Ortiz replied to the thread 8hp70 heater bypass.@Fritter, am I right that your experimenting suggests that your transmission was overheating due to an over-filled transmission? Let us...
-
Here's a follow up to post #420 / 421: In post 425 I stated that ~28 fl oz of excess transmission fluid was removed while following the...
-
Daniel Ortiz reacted to Wild one's post in the thread ZF8 - PPE Pan Install and D6 Changeout to Maxlife with
Like.
If you do the service using factory fluid and pan,they're gonna have a hell'va time proving you serviced it,if you do have a warrenty... -
Daniel Ortiz reacted to Wild one's post in the thread ZF8 - PPE Pan Install and D6 Changeout to Maxlife with Like.
Won't work,as the ZF fluid is a differant oddball colour then the after market fluids,and they'll catch it as soon as they drop the pan...
-
Daniel Ortiz replied to the thread 8hp70 heater bypass.@Fritter , that's some excellent data recording you've done there. Major props. I agree with all your concerns. The biggest concern...
-
Here is a picture of the previous posts attached files.
-
Follow on to post #374 hawsk99gt & Daniel Ortiz, first post I’ve seen that is similar to the operation of my Ram. I have a stock vehicle...
-
5 more in stock... FYI.
-
Daniel Ortiz replied to the thread ZF8 - PPE Pan Install and D6 Changeout to Maxlife.@Gero , I jack each end of the rear axle up separately and stick a jack stand under, plus a bit of 2x6 under each jack stand, just...
-
-
Loading…
-
Loading…
Members online
- zogg
- 14 Lonestar
- pacofortacos
- M3AN ONE
- Daw14
- Cableman
- RBJRBJ
- oe542bob
- MOPAR78
- duckman631
- Ghost1500
- KPMH
- Billet Bee
- Sweeper6
- Wild one
- barbosa
- healthyrx
- theblackduck87
- WY.Ram
- BobWh
- ToolMan314
- My14Laramie
- BWL
- Old Cop 66
- jawzs2
- mikey517
- Adamcr68
- jknorr2112
- willsz71
- MykeD
- AKBlackhawk
- 56PW17
- mvmatt
- tjfdesmo
- hemihustlin
- ColesRAM
- Fuuxcore
- Hookedup87
- jlancaster80
- Gerrie2
- Team Horner