Idledrummer
- Posts
- 65
- Reaction score
- 37
Latest activity Postings About
-
-
I just changed mine and put on a felpro gasket for the 2nd time. I prefer it to the sealant that came from the factory as there is no... -
If the fluid you're using says it's limited slip ready then you don't need more additive.
-
Idledrummer replied to the thread Trying to turn differential wheel to remove axle shaft.Yes, that is what I meant, thank you!!
-
Idledrummer reacted to 18CrewDually's post in the thread Trying to turn differential wheel to remove axle shaft with
Like.
I think your question is if axle BEARINGS get packed? No, they will be lubed by the gear oil that makes its way down the tubes. I... -
Idledrummer replied to the thread Trying to turn differential wheel to remove axle shaft.Hi again, just making sure I am not crazy, ready to put everything back together, the rear axle shaft gearing don’t need to be packed...
-
Idledrummer reacted to 18CrewDually's post in the thread Trying to turn differential wheel to remove axle shaft with Like.
Rear Caliper Bracket. You can get the assembly with backing plate. Aftermarket is also available.
-
Idledrummer replied to the thread Trying to turn differential wheel to remove axle shaft.Cool, I will try that. Do you know the replacement bolt For this? Can’t seem to find out.
-
Idledrummer replied to the thread Trying to turn differential wheel to remove axle shaft.Hi, so the job is to replace the backing plate, and all brake hardware, but once I learned I had to remove the axle, decided to do...
-
Idledrummer reacted to Dodge 1500 4X4's post in the thread Replace rear axle bearing while replacing brake backing plate? with Like.
I would replace your axle bearings and seals along with the backing plate and emergency brake assy, make sure you pull the bearing race...
-
Idledrummer reacted to OC455's post in the thread Replace rear axle bearing while replacing brake backing plate? with Like.
Bearing and seals would not be a bad idea.
-
Idledrummer replied to the thread Trying to turn differential wheel to remove axle shaft.Does anyone know what part is the one with the two holes to attach the caliper bracket? Also trying to find the 3 bolts that holds the...
-
Idledrummer replied to the thread Trying to turn differential wheel to remove axle shaft.Thank you everyone. I had to put the transfer case in neutral also, manual didn’t teach, turned car on, brake pedal, transmission in...
-
-
Idledrummer replied to the thread Trying to turn differential wheel to remove axle shaft.I don’t know how. Trying to find instructions.
-
Idledrummer replied to the thread Trying to turn differential wheel to remove axle shaft.i am 4wd. Tried to put the gear in neultralight, but didn’t help. I have a neutral button, but doesn’t seem to be doing anything. I...
-
Idledrummer posted the thread Trying to turn differential wheel to remove axle shaft in General Discussions.Hello everyone, I removed the rear differential cover to remore axle shaft. I am trying to turn the wheel to get a better working...
-
-
-
Loading…
-
Loading…
Latest posts
-
-
Would you run Michelins anymore? Or any tire that uses recycled plastic?
- Latest: Shawn Burns
-
-
-
Staff online
-
G-Ride990Administrator