Recent content by justinkyleo
-
Ram 1500 Integrated Aux Switches
There is not unfortunately. Android and Windows only.- justinkyleo
- Post #24
- Forum: Audio & Electronics
-
-
AlfaOBD
I can't find a pin kit on the connector repair website anywhere. Hopefully someone has a parts counter buddy that can chime in. Or possibly just take a trip to a junk yard and clip off a whole connector. That would give lots of pins with pigtail wires attached to splice to.- justinkyleo
- Post #3,441
- Forum: 4th Gen DIY
-
AlfaOBD
So, who wants to be the guinea pig with base headlights that populates these two wires in the bcm, and runs it to the front so we can have dedicated drl's? I know I'd prefer led strips instead of just having my turn signals lit up.- justinkyleo
- Post #3,438
- Forum: 4th Gen DIY
-
AlfaOBD
This may have already been covered, but has everyone actually connected the cargo camera to the linbus at the bcm to get the static line to display? The camera definitely has to be connected just like factory for the line to be projected to the camera.- justinkyleo
- Post #3,314
- Forum: 4th Gen DIY
-
AlfaOBD
That's where I got my check box to show up in my radio. I've never had a "drl csm" show up in my logs or in the app. I'm in a '16 2500 if that makes a difference. Mine is a G56 truck so my turn signal drls only come on after I get up to speed.- justinkyleo
- Post #2,487
- Forum: 4th Gen DIY
-
-
AlfaOBD
Sorry it didn't work for you guys. Mine are in the base evic under commercial settings. These are the settings that were mentioned above. You can configure everything from there.- justinkyleo
- Post #2,329
- Forum: 4th Gen DIY
-
AlfaOBD
I did This then This. It worked like a charm for me. Only the four showed up in the evic under commercial settings initially. Then the second link is how I got all five. Seems that it hasn't worked for everyone though.- justinkyleo
- Post #2,194
- Forum: 4th Gen DIY
-
AlfaOBD
Sorry, I edited my comment. I was watching the video above and thinking how I would like mine in the radio as well. Had a brain fart. Mine are definitely in evic.- justinkyleo
- Post #2,133
- Forum: 4th Gen DIY
-
-
AlfaOBD
As far as I know, all CSM's are in the bcm. I've only used android, and have no experience with the windows version.- justinkyleo
- Post #2,118
- Forum: 4th Gen DIY
-
AlfaOBD
You just have to enable the Aux Switches CSM and it'll show up. I only had 4 show up initially, but then I did THIS and switch 5 showed up. There have been mixed results on some trucks in getting all 5 switches.- justinkyleo
- Post #2,112
- Forum: 4th Gen DIY
-
AlfaOBD
I also wanted this option. Fortunately for me, this option along with cruise control high idle with my G56 were just added benefits that came with my tuning from HPP... I don't think it's as easy as a setting in the bcm. I think it's in the ecm. *BUT* if the '17 bcm that is shared is also tuned...- justinkyleo
- Post #1,813
- Forum: 4th Gen DIY
-
AlfaOBD
I messed with the same setting back around post 1707. All the configs that I've seen have the ambient temp sensor present to no, and that will default the location setting to undefined. To correct my mistake I had to set my config back as stated, then clear the bcm faults, drive the truck until...- justinkyleo
- Post #1,812
- Forum: 4th Gen DIY
