Recent content by Kyle_14_Ram_1500

  1. Kyle_14_Ram_1500

    Modifystreet headlight build

    Ok. Thanks for clarifying for me. I was thinking that’s what would have to be done to fix it. I like your set up. If I ever find time between work, my side jobs and the kids, I’ll probably take a stab at fixing what I have or modding them like you did. Have a good one man. Sent from my iPhone...
  2. Kyle_14_Ram_1500

    Modifystreet headlight build

    Ok I get the vertical alignment for aiming the head lights. That’s not the issue. Right now the cutoff for the low beams is rolled/canted/rotated, whatever you want to call it, ever so slightly so the cut off is not level when my truck is on level ground. I know step is there and is supposed to...
  3. Kyle_14_Ram_1500

    Modifystreet headlight build

    Hey 1500ram12, I know this is an old thread but I figured that you might know the answer to my question concerning the alpharex lights. I currently have the same version you modified, installed about about a year and a half ago. I noticed at the time that my low beam cut offs on either one or...
  4. Kyle_14_Ram_1500

    AlfaOBD

    I saw that in another thread in the search I did. I’m keeping this in my back pocket. I let my buddy know this as well. Thanks! Sent from my iPhone using Tapatalk
  5. Kyle_14_Ram_1500

    AlfaOBD

    Yes I missed it some how. [emoji2357] I was using the website version instead of tapatalk. I think it’s a little harder to find things due to the formatting. At least it is for me. Thank you. Sent from my iPhone using Tapatalk
  6. Kyle_14_Ram_1500

    AlfaOBD

    Thanks must have missed it. Sent from my iPhone using Tapatalk
  7. Kyle_14_Ram_1500

    AlfaOBD

    Hey guys. I’m trying to help some one out with getting their skim pin code from the dealership. I could have swore that there were some recommendations on the first post of this thread with tips for dealing with a dealership that is not willing to give you the skim code, but upon looking, I...
  8. Kyle_14_Ram_1500

    2014 Ram 1500 driver's side stub shaft

    Basically what I’m thinking. I’m keeping an eye on my seal but so far so good. Looks like the auto parts I checked had them in stock so should be able to get one if needed easily. Sent from my iPhone using Tapatalk
  9. Kyle_14_Ram_1500

    2014 Ram 1500 driver's side stub shaft

    So yesterday, after having gotten my new tires the previous day, on the way into work I heard a “light metal rubbing” noise kind of like a brake rubbing noise. Got home after work and checked my driver side out more. Turns out my driver side wheel bearing failed. So last night, I replaced the...
  10. Kyle_14_Ram_1500

    2014 Ram 1500 driver's side stub shaft

    It was on a jack in this video but I am getting similar play and sound when it is on the ground as well. The passenger made some noise when jacked up but not near the movement or noise. I’ve heard some popping from that side in the last 6 months during tight turns that I feared was CV joints. I...
  11. Kyle_14_Ram_1500

    2014 Ram 1500 driver's side stub shaft

    Awesome! Exactly what I wanted to know. Not leaking currently so sounds like the seal is still good. From what I have seen online, it’s best to disconnect the upper ball joint when replacing CV axles on these trucks. I did it that way with my S-10 when it needed CV axles. I have a ball joint...
  12. Kyle_14_Ram_1500

    2014 Ram 1500 driver's side stub shaft

    So am I correct to assume that pulling the intermediate shaft would also drain the differential fluid? Is there a seal there that needs replacing? Or is it isolated from the actual drive gearing in the diff? Thanks for the feed back! Sent from my iPhone using Tapatalk
  13. Kyle_14_Ram_1500

    2014 Ram 1500 driver's side stub shaft

    Hey everyone, hope you all having a good day. I have a 2014 Ram 1500 4x4 with 90,000 miles and noticed a rattle going over bumps coming from the front drivers side. Got underneath and looked at the CV shaft and this is what I found: Figuring its time to replace the CV shaft and stub shaft. Do...
  14. Kyle_14_Ram_1500

    AlfaOBD

    No dice on the a range parameter, at least for my truck. Let me know if you have any luck. I may reach out to AlfaOBD directly to see if they are aware of any issues and what else can be tried.
  15. Kyle_14_Ram_1500

    AlfaOBD

    Any one know that the Cluster-Fuel tank 2 calibration is for? I’m assuming it’s for a duel tank set up? Also what is E stop datum for fuel volt? Both the cluster fuel tank 1 and 2 have that parameter in the drop down. It has selection from 0 to 63. Sent from my iPhone using Tapatalk
See more

Latest posts

Members online

... and 11 more.
Total: 1,067 (members: 61, guests: 1,006)
Robots: 1,658

Forum statistics

Threads
195,699
Posts
2,873,463
Members
156,576
Latest member
avdominguez82

Share this page

Top