Lyle Longboat
- Posts
- 1,717
- Reaction score
- 1,684
Latest activity Postings About
-
-
I'm looking for advice on replacing my oil pan gasket on my 2005 ram 1500. I don't know exactly what I have to do to drop the pan... -
Lyle Longboat replied to the thread Oil pan gasket 5.7 hemi.I have a 3” body lift and the front cranked up to 2”S, will this still give me issues now f I go ahead and try and drop the pan and...
-
Lyle Longboat reacted to Ole Buck's post in the thread Raptor Lining my entire truck Start to Finish with
Like.
Thanks guys, yes it is work especially doing by yourself with absolutely no previous body or paint experience. I ordered another two... -
Lyle Longboat reacted to Ole Buck's post in the thread Raptor Lining my entire truck Start to Finish with Like.
Lessons learned, (1) I have major respect for paint and body technicians. When they say prep is 99% of painting, yea they know what they...
-
Lyle Longboat replied to the thread Welding on body of 2008.I second what is stated, practice on scrap metal/steel roughly the same gauge you are welding, sheet metal will burn through if you...
-
NEVER Practice on the vehicle that you plan to fix up use scrap about the same thickness useful magnet...
-
Lyle Longboat replied to the thread Welding on body of 2008.Well I just competed the welding process on both inner and outer rockers, cab corners. The first step I did was cut Al the rust out with...
-
Auto darkening hoods are fabulous once you get the darkness set right and the speed of darkening if you buy the more expensive hoods...
-
before After
-
Lyle Longboat replied to the thread Torsion Bar Adjustment 2005 Dodge Ram.Truck doesn’t have 2” lift keys, they stock. The front has 2” shocks and the keys where already adjusted for 2”S before I changed the...
-
Lyle Longboat replied to the thread New Jack for lifted 1500.I use my 3 ton jack with a 4x4 block of wood. Use my 6 ton jack stands and no issues. 6” suspension lift/3” BL on 37s. Never had a flat...
-
Knock on wood my 2017 2500 6.4 has been flawless 96K except for the turn signal not turning off after a left turn. installed a thermal...
-
Lyle Longboat replied to the thread Torsion Bar Adjustment 2005 Dodge Ram.Sounds good, thanks! I actually should book a dental soon! lol
-
Lyle Longboat reacted to Ole Buck's post in the thread Torsion Bar Adjustment 2005 Dodge Ram with Like.
take a measurement from the center of the hub/wheel to the bottom of the fender on both sides while truck is sitting flat and level...
-
Hello, Checking to see if anyone knows the amounts of turns on the torsion bar keys to get the front up to 2”s of lift? The reason I’m...
-
-
Loading…
-
Loading…
Members online
- Wild one
- bpgt
- 2manycars
- Slusho
- Roman217
- GTyankee
- Downzero
- ExpressRules
- Zeak
- [email protected]
- BIGvolFAN
- HEMIMANN
- Hugh Johnson
- Chlorum
- jabartram
- OC455
- jws123
- RCflyer
- tenx82
- Antoniosmk
- Levioldham17
- Dontra
- ER2531
- hemihustlin
- GC1715
- Renegade04
- kad
- drozek
- Stormtrooper1
- Snafudilligaf
- KalboKalbs
- DILLIGAF
- Darkhood
- umbighouse
- harveygdl15
- Not so old grey
- FF376
- Alphadog1911
- Snoopy
- LaneStain
- spacex
- CrasherAsher
- Dinky
- gbrpu
- OnlyStandard
- Tach_tech
- Docwagon1776
- CaptQ
- Wornslick
- KKBB