Midknight
- Posts
- 162
- Reaction score
- 157
Latest activity Postings About
-
-
No one in the shop knows how to weld I guess -
Midknight replied to the thread AFE Shorty Headers.Yes, I agree with the Remflex but that’s not what comes with the AFE headers.
-
Yes 100% to all of this except the gasket, the Remflex does not have the heatshield and is by far the more recommended gasket on here...
-
Midknight replied to the thread AFE Shorty Headers.First, if you have broken studs you’ll need a welder and some nuts. Even if you don’t it’s possible one might break when loosening so go...
-
Huh? Everything costs a grand to fix anymore and 115k truck is worth a lot.
-
Midknight replied to the thread 3.21 Ring and Pinion.Rear only.
-
Looking to source a new ring and pinion for my 2014 Ram 1500 4x4 with 3.21 gears. These seem to be on back order everywhere I look.
-
Ceramic coated AFE's with Remflex here, flange is still giving me a little tick on the pass side, might have to drop the y pipe from...
-
Midknight replied to the thread Shorty headers.Just did the AFE shorties myself last weekend. Had 3 broken studs, two passenger rear and one front driver side (dipstick). For me...
-
Midknight replied to the thread Transmission fluid - not to change, or run it low??.You'll be pumping fluid in while it's pouring back out. Not gonna work. This job is barely harder than changing your oil if you have the...
-
Midknight replied to the thread Differential fluids?.Yes, you will transfer the bolt sleeves to the PPE pan. The PPE is deeper and holds a quart more they claim. I had to unbolt and jack my...
-
Midknight replied to the thread Those with a remote cd player can you do a fella a favor.i.OK, so kinda had two different reactions but to answer your question it turns off/pauses when turning the engine off or to ACC. The...
-
I've used 87 since my 14 was driven off the dealer's lot. Runs fine, the computer may pull the timing, but not anything I've ever...
-
-
Loading…
-
Loading…
Latest posts
-
-
-
-
Preemptively replacing cam and lifters on a 5.7 Hemi *before* tick?
- Latest: Dodge 1500 4X4
Staff online
-
G-Ride990Administrator
Members online
- huntergreen
- Amstras1
- VanCitySteve
- K9122
- Highway_livin
- srv1
- Sierra
- Wyatt118
- Zoe Saldana
- droopie85gt
- Grenadiers
- irap93
- Dodge 1500 4X4
- Jayc19
- Oliver Closehauf
- MN snow king
- jlchristopher
- SCARyan
- corneileous
- RJL1
- Skyroamer
- G-Ride990
- HK1837
- Gajeep93
- Randy Grant
- RHightower
- langillen
- CamperMike
- TestPilot57
- jawzs2
- East0352
- Bonecollector
- KKBB
- Brakoske
- Racing Woody
- Adrian77
- bob49
- Rado
- az chip
- TrueRamRyder
- kevkev
- LeftShark
- SR70
- Henry7636
- RamBat23
- Mittens
- delgado647
- Rb2500
- jagman_xjs
- Fabio Ricetti