Recent content by OverlandingGoat

  1. OverlandingGoat

    What is this vent for?

    While working on the truck I found this vent, it’s behind the back seats and appears to vent to the outside, facing the bed of the truck. What’ it used for or it’s purpose? I plan to run my solar panel cables through the vent. Sent from my iPhone using Tapatalk
  2. OverlandingGoat

    OverlandingGoat Build Thread - '19 PW

    Got the fridge placed. I was going to build a custom platform and then realized I could remove the stock platform from the seat and reattach it using the factory bolts for the chair I had just removed. So glad because it maintains the stock look and allows me to store some stuff under the...
  3. OverlandingGoat

    OverlandingGoat Build Thread - '19 PW

    I do tow fairly often with the truck and with all my gear in the back and the tongue weight, I wanted a way to keep the truck level and avoid the front end rising as well. But the most important part was not to impact my articulation capabilities. I decided to go with SumoSprings and I have to...
  4. OverlandingGoat

    OverlandingGoat Build Thread - '19 PW

    Removed the 40 portion of the 60/40 rear folding seats to make way for my fridge and auxiliary battery setup. Sent from my iPhone using Tapatalk
  5. OverlandingGoat

    OverlandingGoat Build Thread - '19 PW

    Using the ActionTrac Recovery Boards Sent from my iPhone using Tapatalk
  6. OverlandingGoat

    OverlandingGoat Build Thread - '19 PW

    Everyone needs a place to lay their head after a day on the trails. I’m using a RoofNest Falcon XL Sent from my iPhone using Tapatalk
  7. OverlandingGoat

    OverlandingGoat Build Thread - '19 PW

    Needed somewhere to put the tent, decided to use UpTop Overland for my bed rack. They offer an all aluminum product that is light and strong. Also it had all of the built in attachment points for the gear I plan to use. Install was easy, do wish the truck had some rails in the bed so I didn’t...
  8. OverlandingGoat

    OverlandingGoat Build Thread - '19 PW

    Rock rails or steps? Make no mistake, steps are NOT rock rails. I made the conscious decision not to do rock rails this time. I don’t plan on rock crawling and the kind of travels I’m looking at doing shouldn’t need them. So I decided to go with steps this time. I chose the. N-Fab steps...
  9. OverlandingGoat

    OverlandingGoat Build Thread - '19 PW

    Decked system. I love the versatility of this system and all of the opportunity to store my camping gear and lose the boxes I used to use to store gear in the truck. I do caution you though, if the depth of your bed is important to you do NOT do this mod. You lose all depth, it’s essentially...
  10. OverlandingGoat

    OverlandingGoat Build Thread - '19 PW

    I’ve run Nitto Ridge Grapplers on the last 2 Jeeps so I figured I would run them here too. This is the first time going with 37s though, in the past I’ve only run 35s. Also went with the Method wheels with a +25 offset to keep the positioning as close to OEM as you can with non-OEM setup. I...
  11. OverlandingGoat

    OverlandingGoat Build Thread - '19 PW

    I highly suggest ceramic coating to protect the paint for your vehicles... Just look at that reflection, you can’t get it any cleaner after a day off-roading. Sent from my iPhone using Tapatalk
  12. OverlandingGoat

    OverlandingGoat Build Thread - '19 PW

    Here’s the first and last stock pic: Sent from my iPhone using Tapatalk
  13. OverlandingGoat

    OverlandingGoat Build Thread - '19 PW

    Hey everyone! I'm going to keep track of my Overland build here and post up pictures and general information about any of the mods or parts I throw on the truck. Couldn't be more excited about the build, this is my first Power Wagon. Coming from a Jeep, this should be interesting...
  14. OverlandingGoat

    '19, is it a Smart Alternator?

    Does the '19 and I suppose the '20 as well, do they have a Smart Alternator varying the output? What's this part for? It's attached to the negative post on the battery.
  15. OverlandingGoat

    Those who have trimmed their inner fenders step on in...

    I have a 2019 with 37" Nitto Ridge Grapplers. I heated the area with a heat gun, then used a utility knife to cut the area out. Hit any exposed area and red paint with black bed liner. If you didn't know what to look for you would never know it was cut. Problem solved. I do know there are...
See more

Latest posts

Staff online

Members online

... and 7 more.
Total: 1,326 (members: 57, guests: 1,269)
Robots: 1,774

Forum statistics

Threads
195,682
Posts
2,873,283
Members
156,548
Latest member
MTaylor77

Share this page

Top