-
-
Rrdecae81 replied to the thread Not sure if this is the correct thread area, but have a need for soft bag luggage.all good suggestions 1. currently not interested in the metal box solution. that was my first thought, but really only need the storage...
-
Rrdecae81 replied to the thread Not sure if this is the correct thread area, but have a need for soft bag luggage.well shoot I was hoping at least one person might have used such an item in their truck bed. I am assuming most have a tonuea cover...
-
Rrdecae81 posted the thread Not sure if this is the correct thread area, but have a need for soft bag luggage in Heavy Duty.so I use my 2018 Ram 2500 CC/LB flat bed (cummins) for motorcycle trips Many times I have 4 large adults in the cab Basically no room...
-
Rrdecae81 replied to the thread lighting issue/problem.so it turned out to be an easy fix. Somehow I made a mistake in creating my "cross reference" between OEM wiring and bed wiring. so OEM...
-
Rrdecae81 replied to the thread lighting issue/problem.ok interesting it was not the connector, not OEM wiring/fuse/relay, so I am trying to figure it out
-
Rrdecae81 replied to the thread lighting issue/problem.never mind, duh I posted the answer and did not see it power from OEM to female connector all good power to flatbed wires = power to...
-
Rrdecae81 replied to the thread lighting issue/problem.ok so yes, now it shows left rear bulb and right rear bulb out message however as I noted I powered the lights directly and they are...
-
Rrdecae81 replied to the thread lighting issue/problem.did not look at the dash, I will check, when I had them hand connected and covered with tape, no warnings.
-
R2018 Ram 2500 CC/LB so I removed my OEM bed and installed a flatbed I could not find an aftermarket pigtail, disappointing but not a big...
-
Rrdecae81 replied to the thread need "pigtail" from OEM turn/running/brake light.thank you I did reach out, no answer yet, and I kind of want to fix this before I leave on a 1-week vacation next week for Thanksgiving...
-
Rrdecae81 replied to the thread Front hitch install while keeping factory tow hooks in 1500.so sorry I missed that, I did not know the tow hooks were different. to be honest I thought the front layout was the same for the 1500...
-
Rrdecae81 replied to the thread Front hitch install while keeping factory tow hooks in 1500.i went to etrailer.com. entered my vehicle 2018 ram 2500 entered front receiver, I think every option had the tow hooks included? if...
-
Rrdecae81 replied to the thread Front hitch install while keeping factory tow hooks in 1500.I might be missing something, but seems like a lot of work, just buy a front hitch with the hooks incorporated. that is what i did, 1...
-
R2018 Ram 2500 CC/LB I removed my OEM bed, and installed a flatstaked bed. I need some sort of pig tail to go from the OEM connector that...
-
-
Loading…
-
Loading…
Members online
- Dean2
- wrench78
- corneileous
- bfill_rebel
- SMFL
- billetgrey
- cola tech
- Wild one
- DILLIGAF
- 97RedRam
- RodRamCar
- LayLow
- raggydoo
- Kabitz
- yogibear18
- bob49
- Bighorn John
- Racer9
- RJL1
- Airdog
- olyelr
- professor00
- Mlarv5
- tswannnlk
- JohnCA
- Moldbishop
- 91rt
- 1979 300
- carverwagon
- osprey ram
- Pgray21
- HEMIMANN
- Racc_506
- sflub
- nylonguy
- GTyankee
- gtaber76
- crazzywolfie
- BenWade
- billcupp
- CanuckRam1313
- clifford15
- mario582
- maxx442
- Sean J Blackburn
- gevans58
- Randy Grant
- Mistalove
- yakalong
- Duflick