Recent content by Seth Zubay

  1. S

    Transmission/Alfaobd Help

    The exact option that was change as I thought was shifter selection, was actually "VehConfig 1-Shifter Type." Where in my case it had " 4 pos Electronic Range Select with Enable Switch (ERS4ESW)" which mine doesn't have and needed to be changed back to " 4 pos Rotary Eshifter PRND DS (RS4)" to...
  2. S

    Transmission/Alfaobd Help

    Update: After comparing an old alfaobd list I had on hand of all my set settings, and comparing it to the current ones, I found the issue. My shifter selection option had the wrong rotary switch option. This thread can be deleted.
  3. S

    Transmission/Alfaobd Help

    Short review: last night I installed my push-button start kit that I received from AutoTech. I was changing settings in alfaobd to correctly have the bcm register that it is push-button now. Somewhere in between doing that and cooking dinner, my buddy thought it would be cool to change settings...
  4. S

    Driver Side Window Switch Help

    Update: Using alfaobd I was able to read the error codes of the driver side module, radio hub, and passenger side module. After looking at it, there was a communication error. Went to the stealership to get the parts, as my window needed to be fixed due to on and off military installation...
  5. S

    Driver Side Window Switch Help

    Quick Update: I received my new door module (68225103AD) from AllMoparParts today and installed it. It made zero difference in performance as the driver and passenger windows still do nothing from the master switch on the driver side. All fuses are good as far as I can tell. I will have to test...
  6. S

    Driver Side Window Switch Help

    Just ordered my module through AllMoparParts, cheaper than both dealership and MoparPartGiant. Shipping wasn't bad at all, $13.00 for USPS Priority to Alaska. Will Update this forum when the part comes in. Please let me know if any other ideas or suggestions come up.
  7. S

    Driver Side Window Switch Help

    Update: I have checked Fuse F24 (Drive Side Mod) and it was good. Then pulled the door panel off to inspect the door module. Installed was PN: 68225103AC which comes up incompatible with my VIN. I will have to replace it with the updated replacement 68225103AD which has to be custom ordered for...
  8. S

    Driver Side Window Switch Help

    I will check with benny as I just replaced the master door switch today and it got the mirrors (folding and movement) and lock working again. The dealership seems to think that the door module PN: 68225103AC went out again so I will have to look into replacing that part.
  9. S

    Driver Side Window Switch Help

    I appreciate your comment. I called the dealership, and they said the part should still be under warranty; however, they want to diagnosis the truck again which is not under warranty and out of pocket. With that being said, if I can avoid having to pay that again I would like to. Dealership up...
  10. S

    Driver Side Window Switch Help

    Long story short, my driver side window switch stopped working, no locks, mirrors, or driver and passenger windows. Only the rear windows seemed to work, so I replaced the master switch as the one in my truck was a cheap aftermarket one and I suspected it went out. After replacing the master...
  11. S

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    I am unsure if it was on the radio before I received it, but it isn’t on mine. I’m in the United States and that’s where the radio is from. I am being told it is from the “Trailer Hitch Camera” option not being enabled in Alfaobd, but when I go to the 2015 Body Module it does not show as an option.
  12. S

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    Yes, however I have the VP4 Nav radio originally, and just upgraded to the 4C UAQ. I have seen the soft key for the back up camera a million times on other people’s vehicles with this same radio.
  13. S

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    This is what I did, however I was looking to get the “Back Up Camera” soft key instead of the “Cargo Camera” soft key. I was able to to get the “Cargo Camera” soft key and it will work for what I need. However, I still yet to receive a “Back Up Camera” soft key for just the back up camera. In...
  14. S

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    I did upgrade to a 2018 UAQ radio out of a Ram 1500. I am going to check the settings when I get off work. However, going from a different forum the “Trailer Hitch Camera” setting is not available on the 2015 BCM, and that is what needs to be activated for the soft key Reverse Camera, I will...
  15. S

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    My final goal was to get the soft key in the control section of the radio to toggle the back up camera. However, I got it to work with the cargo camera soft key, but now that’ve used it more once it’s been activated, it for some odd reason keep cutting out and going back to the control screen. I...
See more

Latest posts

Members online

Total: 371 (members: 16, guests: 355)
Robots: 1,255

Forum statistics

Threads
195,678
Posts
2,873,181
Members
156,533
Latest member
JustinRam1500

Share this page

Top