Recent content by thade
-
Bed and Tailgate Mats
As others have already stated the bedrug is quite nice, and soft. Usually if someone sees it they comment on how nice it is/looks. About the only thing I haul is groceries, and whatever gets put back there stays in place during the trip home. I didn't have any trouble getting the velcro to... -
Carven 5” exhaust tips
From what I could tell the big difference is the double walled tips don't come with new clamps like the old style, but other than that they bolted right up nice and tight. Carven sent me a replacement for one that was slightly scratched up, and the replacement set was a bit wonky. On one of the...- thade
- Post #52
- Forum: Engine & Performance
-
Carven 5” exhaust tips
I'm running a flowmaster outlaw and it sounds exactly the same with the carvens, but I think they make the truck look better . I also went with the newer double walled style.- thade
- Post #28
- Forum: Engine & Performance
-
How To: Add Factory Keyless Enter N Go
Just did a reset and checked to make sure the settings were still enabled, and they are. Still a no go. Trying the battery cable part now. EDIT As is par for the course for me, its often the small things that trip me up. Unhooking the battery for a few minutes fixed it right up. Got a lot of...- thade
- Post #1,161
- Forum: 4th Gen DIY
-
How To: Add Factory Keyless Enter N Go
Thanks for the help. I didnt even have the wireless section you mentioned, and it boiled down to me having to select a different control unit than the one I was in. I found the setting and enabled it. I see the setting in the radio and its set to on, but the door handles are still dead. I'm lost...- thade
- Post #1,159
- Forum: 4th Gen DIY
-
How To: Add Factory Keyless Enter N Go
I have a question that hopefully someone far smarter than I am can help me with. A while back I added remote start, keyless entry and go, etc, and all was good in the world. Fast forward to new rims and tires, and I needed to change a few settings for my new tire size and tpms threshold using...- thade
- Post #1,157
- Forum: 4th Gen DIY
-
Can the dreaded hemi tick happen this fast?
I have a garage kept 2017 model that I bought new and don't drive much. Didn't matter if the engine had been running a day ago, or a week, the lifters would rattle a few seconds on startup and it annoyed the hell out of me. I drained the factory oil out and put RP 5/20 in it. Been silent as...- thade
- Post #23
- Forum: Engine & Performance
-
Adjustable Upper Control Arms
I installed Inez hotrods adjustable upper control arms at the same time I did my belltech 2/4. I read a post somewhere here in the forum that recommended adjusting them out 3/8" so I did. At the time I was worried about the same things you seem to be, but the alignment came out perfect, as did... -
Busted an airlift bag/they have awesome customer service
Yea, they rock. I ordered the wrong kit for my lowered ram on some bad advice. When I emailed them about purchasing new bags separately because I had already cut and ran the lines, they asked for measurements to see what size I needed. As soon as I sent them the info, they shipped me an entirely... -
Belltech 963 nd No rear wobble at any speed !!
I never experienced any of those things after doing the 2/4 on my 17 standard cab w/ limited slip diff, although I expected to. I ended up doing the rest of it anyway, because I was doing it myself and wanted it done right. I did have an issue initially regarding the height, and the rear... -
Black Quads on Blue Ram’s post em up
I think they'll look sharp on there, but I'm a bit biased because I think the black housings look better in general. -
Stubby Antenna
I am that someone. I couldn't care less about the radio, or sattelite version, as I use a usb drive exclusively. I put a 4" or so black aluminum version on my truck a few days after I drove it home from the dealer. I noticed it was picking up stations in my garage when I was swapping head units... -
Question about Air conditioning settings in 18
I fight with my truck over the a/c and recirculation settings quite often. Drives me crazy. -
Install of oem tow hooks on a 14 Express
Thank you sir. Much appreciated.- thade
- Post #324
- Forum: 4th Gen DIY
-
Morimoto xb vertical fogs installed. Small review
That's the way I run mine. No issues yet either.
