-
-
TTest the coolant, get a coolants tester cheap, make sure 50/50. Why would coolant be 221? Mine never got past 206f even on hot days...
-
TI put bed lights in both of my last 2 Rams.I mounted a small rocker switch in the upper corner of the box,where the tailgate closes,and...
-
TWelcome. Whether the rails will fit or not, not know. Depends upon what type rails and mounting bracket locations and WHETHER THE TRUCK...
-
TTominator223 reacted to Tank Guy's post in the thread 2019 Ram 1500 Starter Failure at 98k miles with
Like.
I would’ve taken that starter off and had a look at it. When the starter on my 98 with a Cummins died on me the problem ended up being a... -
TTominator223 reacted to Blizzy1220's post in the thread 2019 Ram 1500 Starter Failure at 98k miles with Like.
Just chiming in to mention that it isn’t an e-torque so no stop start. Last starter I had fail was at 160k miles on an 11 year old...
-
TTominator223 reacted to Burla's post in the thread 2019 Ram 1500 Starter Failure at 98k miles with Like.
You don't think 98k on a starter is a reasonable lifespan, especially in a snow state? In a car with auto start stop as well? I...
-
TTominator223 replied to the thread LT Headers and stock exhaust.FYI. No such thing as a high flow cat. Only larger dia. They all have the same substrate . I had a cat sales guy tell this to me. Who...
-
TNot many shops are set up to do mandrel bends,and the last thing you want is an exhuast done with crush bends. Actually a big 3.5"...
-
TTominator223 replied to the thread 2021 Ram Chipped Windshield.Rock chip repair as a claim , just raises insurance cost for everyone imo. My 04 is on its 2nd windshield . Right at 424-425k miles. The...
-
TTominator223 replied to the thread Exhaust Manifold Question.. I know (Arizona).I would use less torque on new bolts. I did the OE ones on my 04. Same gaskets new OE bolts Less torque than spec. That was 200 or so...
-
TTominator223 reacted to BenWade's post in the thread Exhaust Manifold Question.. I know (Arizona) with Like.
Have the shop put the same manifold back on with new bolts and gasket. No need to machine the old manifold. Just torque the new bolts...
-
TTominator223 replied to the thread New lights.The little lites aren’t blinking Clark ! lol
-
TTominator223 replied to the thread Determining rear axle equipment?.Used to be a sticker on pass side rear axle facing cab. Tells ratio.
-
TTominator223 replied to the thread Smoke and heavy condensation on windshield.If it smells like scorched garlic , it’s electrical . If it smells sweet it’s coolant . If neither it may be from the cabin filter. Or...
-
TRock Auto. Not Amazon for parts. We had bad results with Moog for U Joints - disintegrated after 1 year. Chineseum knockoffs. Ended...
-
-
Loading…
-
Loading…
