Recent content by tscarber

  1. tscarber

    Camshaft kit help

    Learn my lesson on this one. Texas Speed kit is great but had bug after bug and got an amateur tuner to do it and still have some slight problems i am working out.
  2. tscarber

    Piston rings

    I just completed a full rebuild, MDS delete, All of the "hellcat" upgrades, 110k miles and piston rings looked perfect. I personally think its not a lifter but a camshaft hardening issue. I bought the Texas Speed MDS delete kit and used this forum for any issues or upgrades.
  3. tscarber

    P000B Tuning or Bust?

    Any update or info on this? I am having P000B on rare occasions. Just tuned and MDS deleted. Tuner did state he deleted VVT out of the system whatever that means.
  4. tscarber

    Truck Dies while coasting

    After some time working on the truck. I have now got it tuned and worked out some electrical bugs having to do with a dead cell in the battery that i realized is 5 years old. She runs and drives smoothly. I am needing the tune adjusted just a hair due to sensitive throttle and shifting is not to...
  5. tscarber

    No Codes, No Start

    After some time working on the truck. I have now got it tuned and worked out some electrical bugs having to do with a dead cell in the battery that i realized is 5 years old. She runs and drives smoothly. I am needing the tune adjusted just a hair due to sensitive throttle and shifting is not to...
  6. tscarber

    Truck Dies while coasting

    The truck idles and drives perfect up until at random stops it dies with no warning. I have done all of the work myself besides the tune. i am going to check all of my grounds as well, someone told me older chevys would do this when not grounded properly. All of this info is a great start. I...
  7. tscarber

    Truck Dies while coasting

    Starts right back up with no issue and drives. Only dies every 3rd or 4th stop
  8. tscarber

    Truck Dies while coasting

    I have a 2013 Ram 1500 5.7, After a full motor rebuild the truck is now dying when coasting. No codes, No warnings. I took the truck to be tuned after a Texas-Speed & Performance MDS delete kit. I have worked all of the bugs out besides this. All components and sensors have been replaced. It...
  9. tscarber

    No Codes, No Start

    The cam i bought is a stock one from Texas-Speed & Performance
  10. tscarber

    No Codes, No Start

    After fixing all of my issues, the truck is running smoothly. Heres the catch, after revving it up to 3-4k rpms as it comes back to an idle it dies. My scanner shows no issues and shows the cam / crank in sync, Engine light only comes on after 3rd-4th start up code is p0016 - has to do with...
  11. tscarber

    No Codes, No Start

    Cylinders 5 & 8 had no compression. I fixed #5 with an adjustment to the rod. Now #8 exhaust rod is good but the rocker arm bolt at the back of the head and next to it are broken. I had to order a new exhaust side Rocker Assembly from Summit Racing Mopar part # 53021553AB. After 5 total days...
  12. tscarber

    No Codes, No Start

    The truck was tuned before anything was done to it, with no issues. After looking at it I have found cylinders 5 & 8 have no compression. I am fixing this today and inspecting my valvetrain of any damages. I will update soon.
  13. tscarber

    No Codes, No Start

    Recently I have replaced the Cam / Lifters in my 2013 Ram 1500. I replaced cam, lifters, oil pump, water pump, sparkplugs, cam position sensor, VVT solenoid, cam phaser, timing chain & accessories. Upon start up the truck will not run. The truck will turn over with no issue but will not run. I...
See more

Latest posts

Staff online

Members online

Total: 1,335 (members: 44, guests: 1,291)
Robots: 1,835

Forum statistics

Threads
195,638
Posts
2,872,799
Members
156,469
Latest member
amadhi89

Share this page

Top