so I finally got my new intake I put it in truck fires right up runs for about 3 mins and then stalls right back to red lightning bolt and will only start and run while on the gas
ok I found the issue my intake is melted from all the back firing I guess but the inside of the tunnels are filled with melted plastic a new one is on the way
my old battery was shot so needed one anyways but still nothing the old one under load test ony held 9.3 volts and when load was removed only came back to 10.8 volts
well I changed the battery this morning another 200 bucks and stiil etc light is on and no idle. I have never been beat by an engine but I think this hemi has done it spent a fortune and it sits in the garage mocking me frustration level is past max at this point. Thanks for all the help so far...
anybody want to buy a ram I am now 2200 in to this motor and nothing new throttle body still no change this thing has been tested sideways with no result have had 2 different mechanics look at it and still nothing. I did notice that my battery is dead had to charge it don't know what that means...
yes I have checked all the pins all the wiring after this tb swap I am out of ideas lol thank you guys for all your help I will let you know what happens
mine doesn't close briefly it slams shut you can hear it and see it then as you crank it flaps rapidly from closed to about 1/3rd open if you start it with you foot on the gas and then let off the pedal it slams shut if you stay on the gas it flutters really fast
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.