Alternator Upgrade 160 Amp to 180 Amp

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Poncherello

Junior Member
Joined
Jul 13, 2015
Posts
22
Reaction score
12
Ram Year
2016
Engine
5.7
I have a 2016 1500 5.7, 4x4, 8spd with almost 214K miles. The truck has been well serviced and maintained. The alternator is original, and according to the build sheet it's 160 amp. If I should need to replace it in the future, would I be able to upgrade to 180 amp safely without any wire or computer/software modifications? Down the road, I'm thinking of adding auxiliary lighting & upgrading infotainment system.
Thanks
 

CanuckRam1313

Senior Member
Supporting Member
Joined
Aug 29, 2022
Posts
3,563
Reaction score
8,826
Location
Ontario Canada
Ram Year
2023 Warlock
Engine
5.7
Just buy the 6.4L alternator its 220 amps. Thats what I did. :anitoof:
Any issues with your electrical system in going to that high an amperage alternator?

Did it bolt right in and use the same serpentine belt, too?

I ask as I have a lot of goodies in my truck that draw power, including a 2100W audio system.

Although I use the H8 Odyssey AGM battery and have also installed several additional heavy-gauge grounds throughout my truck, I want to upgrade to the 6.4 alternator in my 23' Warlock, but have been on the fence as I don't want my system to get overloaded per se.
 
OP
OP
Poncherello

Poncherello

Junior Member
Joined
Jul 13, 2015
Posts
22
Reaction score
12
Ram Year
2016
Engine
5.7
Just buy the 6.4L alternator its 220 amps. Thats what I did. :anitoof:
It came with a 160amp, if I go 220, I dont want have to rewire the truck just want to do plug in play so to speak. I just asking if 180 amp would be allright.
 

CanuckRam1313

Senior Member
Supporting Member
Joined
Aug 29, 2022
Posts
3,563
Reaction score
8,826
Location
Ontario Canada
Ram Year
2023 Warlock
Engine
5.7
It came with a 160amp, if I go 220, I dont want have to rewire the truck just want to do plug in play so to speak. I just asking if 180 amp would be allright.
I'll let you know how it goes!

I just bought a brand new (not reman) Bosch 220A alternator for my 23' 4th Gen Classic Warlock and put it on next week.

Rock Auto is the place to shop for sure!
Even with USD to CDN, shipping, etc., it was $456.00 shipped to my door in Ontario Canada.

That's less than half of what it would cost me to buy a new one here.
 

Lashlee

Junior Member
Joined
Jan 2, 2026
Posts
9
Reaction score
15
Location
Knoxville, TN
Ram Year
2018
Engine
5.7
Theoretically, the additional amperage capacity of the more powerful alternator won't change how the truck operates. Some aftermarket alternators will supply less power than the OEM at idle, and the extra amperage when the RPM's are elevated. Since it's an OEM replacement, it shouldn't have any issue at idle.

FWIW, 2100 watts (if it's RMS power) is not crazy and shouldn't "need" a higher output alternator. One way to tell, is use a DC current (clamp) meter to see exactly how much power you're drawing from the OEM charging system. One of my stereo builds has almost 3k wrms but only pulls about 35 amps of current at normal listening levels.
 

CanuckRam1313

Senior Member
Supporting Member
Joined
Aug 29, 2022
Posts
3,563
Reaction score
8,826
Location
Ontario Canada
Ram Year
2023 Warlock
Engine
5.7
Theoretically, the additional amperage capacity of the more powerful alternator won't change how the truck operates. Some aftermarket alternators will supply less power than the OEM at idle, and the extra amperage when the RPM's are elevated. Since it's an OEM replacement, it shouldn't have any issue at idle.

FWIW, 2100 watts (if it's RMS power) is not crazy and shouldn't "need" a higher output alternator. One way to tell, is use a DC current (clamp) meter to see exactly how much power you're drawing from the OEM charging system. One of my stereo builds has almost 3k wrms but only pulls about 35 amps of current at normal listening levels.
While I hear you, good sir... I have indeed done my homework!

Installing a 220A alternator in my rig will absolutely benefit my system overall!
 

CanuckRam1313

Senior Member
Supporting Member
Joined
Aug 29, 2022
Posts
3,563
Reaction score
8,826
Location
Ontario Canada
Ram Year
2023 Warlock
Engine
5.7
Theoretically, the additional amperage capacity of the more powerful alternator won't change how the truck operates. Some aftermarket alternators will supply less power than the OEM at idle, and the extra amperage when the RPM's are elevated. Since it's an OEM replacement, it shouldn't have any issue at idle.

FWIW, 2100 watts (if it's RMS power) is not crazy and shouldn't "need" a higher output alternator. One way to tell, is use a DC current (clamp) meter to see exactly how much power you're drawing from the OEM charging system. One of my stereo builds has almost 3k wrms but only pulls about 35 amps of current at normal listening levels.
I wanted to share this with you, too, good sir.... (from our friends at AI ;))

I have also done the "big-three" and beyond grounding upgrades, too.

A new Bosch 220A alternator is an excellent, highly beneficial upgrade for your 2023 Ram 1500 Classic Warlock. Because your truck features a factory tow package and lacks the complex eTorque system, it relies on a traditional alternator architecture. Upgrading to a premium 220-amp unit provides the precise electrical headroom required to sustain both your trailering needs and your heavy hitting aftermarket audio modifications.



The Math Behind Your Electrical Load
To understand why the 220A unit is a smart choice, consider how your vehicle allocates electrical power:
    • Truck Baseline Load (95A – 125A): Modern half-ton trucks demand significant current. Your Warlock utilizes electronic power steering (EPS), powertrain management modules, climate controls, and lighting. At a minimum, the running truck consumes roughly 100 Amps continuously.
    • Factory Tow Package Draw (20A – 40A): Towing introduces extra electrical burdens. Hooking up a trailer engages additional exterior brake/signal lights, charges the trailer’s onboard house battery through the 7-pin connector, and continuously powers integrated electronic trailer brake controllers.
    • 2100W Audio Upgrade Peak (150A+ peak / ~75A nominal):
      • Operating at a standard charging voltage of 14V, Ohm's law calculates maximum current draw as 2100W ÷ 14V = 150 Amps.
      • In reality, music is dynamic rather than a continuous test-tone. Assuming efficient Class D amplifiers, your audio system will average around 65A to 75A of nominal draw, though it will spike up to 150A during heavy bass hits.
Total Electrical Demand: Under a worst-case scenario (driving at night, towing a trailer, and blasting music), your truck can easily call for over 200 Amps of current.



⚖️ Why the 220A Bosch Alternator is the "Sweet Spot"

The Pros: Ideal System Matching
    • Eliminates Voltage Sag: Depending on whether your truck shipped with a standard 160A or 180A baseline alternator, your 2100W audio system alone would normally cause severe voltage drops and dimming headlights. The 220A limit provides enough overall capacity to satisfy both the truck and the music.
      • No eTorque Hassles: Because you do not have the mild-hybrid eTorque option, your truck uses a standard serpentine accessory drive configuration. The Bosch unit drops cleanly into place without interfering with a 48V motor-generator unit (MGU).
      • OEM+ Reliability: Bosch utilize highly reliable internal regulators and hairpin stator winding designs. It provides high output without the common reliability issues, bearing failures, or excessive heat generation associated with generic "no-name" high-output alternators.
      • On-Demand Power Delivery: Alternators only supply the current requested by your devices. Running a 220A alternator will not "fry" your factory electronics; it simply leaves a massive safety reservoir sitting there when your audio amplifiers demand it.

    ⚠️ The Caveats: What to Keep in Mind
      • The Idle Output Bottleneck: The "220A" rating is peak output, which usually occurs when driving at highway speeds (above 2,000 engine RPM). At a red light or traffic jam, a 220A alternator may drop down to 100A–130A of actual output. If your stereo is maxed out while sitting still, your truck will still temporarily draw extra energy directly from your car battery.
      • Wiring Requirements: You cannot safely push 220 Amps through the factory charging cables. To properly utilize this upgrade, you must perform a "Big Three" electrical upgrade. This means adding heavy-gauge wiring (ideally 1/0 AWG pure copper) from the alternator power stud to the battery positive, battery negative to the chassis, and the engine block to the chassis.
 

Latest posts

Forum statistics

Threads
213,354
Posts
3,092,143
Members
174,575
Latest member
DITRIO
Back
Top