Yep, sorry to be an imposter but its an '09 Grand Cherokee 5.7L. I couldn't find much info over on the Jeep forums but its the same motor as the 2009+ RAMs so I came over here looking for advice. This forum is a great resource! To be fair, I've got a 2019 Ram 1500 ecodiesel sitting in my...
After a full weekend in the workshop putting the Jeep back together I was finally able to start it up Sunday night. It ran a little rough and smokey at first, and threw a CEL but it eventually smoothed out as all the crud and oil that had gotten in during assembly had burned off. It also looked...
After closer inspection I noticed that the pin that the roller spins on had shifted to one side and actually made it difficult to pull the lifter out of the bore. I had to use a pair of channel locks and slowly wiggle it out of its bore. I slid another lifter into the bore afterwards and it...
It's always so frustrating when you have symptoms that nobody else seems to have had, I had to update it for the next person that gets to go through this. I read through the oil thread and it seems the consensus is the redline 5W30 which I do intend to switch to after I do a 1k mile break in...
Despite me trying to rationalize it being anything but a failed lifter, I started tearing it down last week and discovered a failed exhaust lifter for cylinder 6. I decided to order a complete MDS delete kit with camshaft and the upgraded hellcat lifters in the hopes I never have to deal with...
I got the blackstone analysis back today and the results look to be promising. Would this give the impression that my camshaft is probably fine? I may be comfortable replacing the lifters myself, I was just really dreaded the idea of having to do the cam as well.
A bit of an update: I took it to a mechanic for further diagnosis and they found compression on that cylinder was a little low, they said 70-80 vs 100-105 for others. I had them take the valve cover off and investigate further and they determine that the exhaust valve on that cylinder wasn’t...
Part of me knew in the back of my mind that this was probably the issue, I was just hoping that maybe there was something I wasn’t thinking of that could’ve caused these symptoms. I do have some mechanical ability but mostly suspension, brakes, and maintenance. I’ve never had the heads off of...
Hello, I've got a 2009 5.7L with 173k miles on that has been having issues with a shaky idle and occasionally a P0306 code that I've been chasing for a while and am not sure where to go next.
Symptoms: Misfire at idle that goes away under load or above ~1k RPM, it is definitely a lot worse on...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.