Search results

  1. J

    2013 tuning?

    Looks Like Bully dog has released tuning, so diablo should be right around the corner :) Can't wait.
  2. J

    Looking for Non-Biased Info on Lift Kits

    RCX Lift You are correct, it does have a lifetime warranty. I just verified on their website. To me all of the kits all have the same warranty, and offer the same amount of lift. I'm just wondering what is driving the prices all around besides name.
  3. J

    Looking for Non-Biased Info on Lift Kits

    The cost of the kit isn't a big deal. I would rather put in the research and buy a dependable product and save money in the long run, rather than save money upfront but spend more money maintaining in the long run. :)
  4. J

    Looking for Non-Biased Info on Lift Kits

    I plan on doing some off roading. I'm not about to invest all this money for just a street truck. But it is also my daily driver. I Already got a pair of 5100's for the front, I want to do a 6" lift (so I have the room for 37's Later), and 35's on the stock 20's. I was originally going around...
  5. J

    Looking for Non-Biased Info on Lift Kits

    Lifts Yeah I know it's going to be hard but to find a non-biased view on them but I figured someone has some experience with the different types of kits and can see pros and cons of each kit. Like you said the RCX kit comes with springs and not spacers, I don't know the difference between that.
  6. J

    Looking for Non-Biased Info on Lift Kits

    What is the differences between the different companies out there that supply a 6" lift kit for our trucks (RCX, Pro-Comp, BDS, ect.)? I traveled around to a hand full of 4x4 shops in my area just getting prices for kits and each shop had something different to say about the different kits and...
  7. J

    2013 fuel mileage

    I have the 3.55 gearing and I'm averaging about 16mpg. That's mixed driving. On the highway to and from work I sit it on 60mph on cruise control. Also I have about 26xx miles on it as of today and I have only used 93 octane since I bought it.
  8. J

    I need advice On Tire size and Rim offset

    So having 3.55 gears and going to a 37" or 35" tire, the truck should be re-geared? :/ What would be a good gear for me to look into? I do a good mix of flat and hilly driving.
  9. J

    Smaller Rims, More Tire?

    Does anyone on the site have 37" tires on the stock 20's?
  10. J

    Smaller Rims, More Tire?

    Cool. Thanks for the input guys. Hopefully someone comes along that has a 18" rim with 37" tires. I seen some around online on other trucks but I want to see the setup on a ram.
  11. J

    Smaller Rims, More Tire?

    I'm in the process of buying all the stuff for my lift and i'm looking at rims and tires. I see a lot of people running 20" rims, and I like the look but I'm a bigger fan of more tire less rim. I would like to get 37" tires but say with a 17" or 18" rim. Pros and Cons? Any people running a setup...
  12. J

    Does a lift put extra strain on trans?

    I have the 3.55 gear too and just about to buy some 35" tires. what's your MPG like? 12-13?
  13. J

    Strange feeling in the break pedal after lift.

    Did you figure out what was causing the issue?
  14. J

    blurry back up camera?

    Blurry Back Up Cam A few weeks ago I noticed my camera was blurry and took it into dodge and they told me it was fine. So I ended up going to the new trucks and comparing it to 3 other new trucks on the lot and mine looked like crap compared to them. Got a manger involved and a crysler...
  15. J

    Maryland/Virginia Members?

    I'm in Maryland. Glen Burnie, Anne Arundel County.
  16. J

    The Itch is Getting to me

    Just an update to everyone. I went ahead and ordered the 87mm TB, S&B CAI, and BT Catch Can on Friday. I can't wait to get it all and put it on. :)
  17. J

    The Itch is Getting to me

    Thanks. No I don't know to many people in the area.
  18. J

    The Itch is Getting to me

    Sounds like a plan to me. I was actually going to search through the site to see if there was any type of group meetings going on in the area, so I could go see what others are doing.
  19. J

    The Itch is Getting to me

    I haven't looked to far into tuning yet b/c I wanted to just wait until I was done with all the mods, and use the tune to jsut finish it all off.
  20. J

    The Itch is Getting to me

    yeah see I want a really nice mean sound :) and I'm in Anne Arundel County. Glen Burnie are to narrow it down a bit more.
  21. J

    The Itch is Getting to me

    I probably won't be in the very top half very much at all. 90% of my driving is highway, to and from work. Once I lift, I hope to venture into some trails atleast a few times.
  22. J

    The Itch is Getting to me

    On a side note. I'm looking to get a really nice, deep, rich throaty sounds out of my exhaust so I'm not fully set on the cherry bomb yet.
  23. J

    The Itch is Getting to me

    So I got my truck 2 weeks ago, and told myself I was just going to get a spray in bed liner and leave the rest of the truck alone. Well that's not really working. I have found myself researching engine mods, lifts, ect. So pretty much within the nest few days I'm thinking of making a big...
  24. J

    New 2013 Ram Sport Owner

    So I got my Line-x bedliner put in yesterday and now my backup camera is blurry :( I think the heat from them spraying the bedliner distorted the camera somehow. I'm going to take it to dodge today and see what they say. Also I'll get some pictures of the truck up probably this weekend.
  25. J

    New 2013 Ram Sport Owner

    Yeah I know. I have wanted a truck for a while now and just couldn't find one that I really liked. I was tired of pretty much sitting on the ground when I was driving. I test drove a ton of trucks and was stuck between the sport or a raptor and figured I would enjoy it better if I built it up...

Latest posts

Members online

... and 8 more.
Total: 1,270 (members: 58, guests: 1,212)
Robots: 1,876

Forum statistics

Threads
195,644
Posts
2,872,866
Members
156,480
Latest member
BckwoodsSthrnLwyr

Share this page

Top