Search results

  1. J

    Tail wiggle

    thought the same thing, so I replaced the shocks.....still have the same problem, no help at all.
  2. J

    Tail wiggle

    Pinbox is tight. Trailer is great on another truck. Used different hitch...problem not in hitch. Factory suspension. Hitch is mounted in Puck system....factory. No slider. since problem didn't go away when i traded trailers and hitches......must be in truck. Pin weight, rear axle, front...
  3. J

    Tail wiggle

    I’m having a problem with extreme tail wiggle on my ‘14 2500. Just started with my last trip. I pull a 10k Fifth Wheel. The tail wiggle gets so bad the truck will loose traction and the traction control will kick in and reduce engine power. Very scary. My son has a ‘15 2500 so I moved the hitch...
  4. J

    Core Control arms and towing.

    I’m having a similar problem on my ‘14 2500. Just started with my last trip. I pull a 10k Fifth Wheel. The tail wiggle gets so bad the truck will loose traction and the traction control will kick in and reduce engine power. Very scary. My son has a ‘15 2500 so I moved the hitch and trailer to...
  5. J

    This ones weird.....

    No nothing in ACC either. Is replacing the wireless ignition node a dealer job?
  6. J

    This ones weird.....

    . First thing I tried after checking the fuses was to remove ground for about an hour. I also moved relays from a working truck to just test. No luck. It’s like the key doesn’t turn anything on when in the run position
  7. J

    This ones weird.....

    No red light
  8. J

    This ones weird.....

    Yes the fob will lock unlock Did not see the red security light. Putting key in the ignition lights the instrument cluster. It seems to reset every 15 seconds. When the key is in the ignition and the door is open it does not chime. Do you think this could be the ignition node(module/switch)????
  9. J

    This ones weird.....

    RAM 2500 Diesel 2016 model tradesman. Running great. Get in and everything dashwise is dead. When door is open, odometer displays, but with key in, no EVIC no RADIO, no crank. OBD won't read because it thinks the key is not in the on position. New batteries, voltage 13.8. Checked fuses and...
  10. J

    I315 connector location?

    “If I look up the same diagram for a 2500, the only difference is there is a additional reference, SPL17A, on the L17 circuit that I think might be where it splits off to go to the cab lights. (see below).” Can anyone tell me where this SPL17A is actually located? I have installed cab lights...
  11. J

    AlphaOBD Help

    I have the 8 and yes I was told about the setting by another person. I don’t have that option showing up. Thanks
  12. J

    AlphaOBD Help

    I'm looking for someone in Oklahoma who has Experience and equipment to make some changes in my BCM on my 2014 2500. Specifically, I want to add backup lines on the camera. Message me with your location and cost. Thanks
  13. J

    NAVIGATION IMPORT

    Does anyone know if its possible to import a gpx file into the Nav? Is there an easier way to import points for a long cross country trip? Thanks
  14. J

    Backup Camera Missing Lines

    I believe everything is factory. I did wiring mods today to move the rear view camera into the radio. Swapped the input wires so that both cameras are correct with the soft touch buttons How do you access the BCM customer settings menu? Thanks
  15. J

    Backup Camera Missing Lines

    i just purchased a used 2014 2500 RAM with Cargo and Backup Cameras. I don’t have the lines in my backup camera. I have a 8.4N Radio. There is no place (that I can find) to turn them on/off. Is there a fuse? Possible Software Upgrade? I currently have software version 17.11.07. Thanks in...

Latest posts

Members online

Total: 720 (members: 18, guests: 702)
Robots: 1,537

Forum statistics

Threads
195,623
Posts
2,872,659
Members
156,453
Latest member
Jems007

Share this page

Top