Search results
-
K
And... I got a coilover problem
I installed these coilovers on Saturday, got an alignment today and decided to test them out a bit. Early on I noticed there is a click on the driver's side but not the passenger side. When I looked at the coilovers I noticed that on the driver's side the middle piston that sticks out the top...- Kyle Defenbach
- Thread
- Replies: 25
- Forum: Lifted
-
K
Finally finished wheels and tires
After waiting 6 months for these tires to come out I was finally able to get them, get my suspension put on and throw them on my truck. -Wheels: Fuel Ammo 20x9 +1offset, 5x5.5 -Tires: BFGoodrich KO2 295/60r20 -Suspension: BDS Fox 2.0 coilovers in the front (+2") / Fox 2.0 shocks in the rear...- Kyle Defenbach
- Thread
- Replies: 6
- Forum: Lifted
-
K
305/65R18
2017 Ram 1500 Sport, 4WD. 2" BDS coilovers to level the front end. Will these tires rub with 18x9 +12 offset? Custom offsets has a 1500 running 305/70R18s with a 2.5" level and a +1 offset, they claim to not rub. The 305/70s are over an inch taller with the same 12" width. This seems to be a...- Kyle Defenbach
- Thread
- Replies: 2
- Forum: Exterior
-
K
Regarding Tire Pressure Monitor Sensors (TPMS)
So I have a 17' 1500. I just ordered new wheels and tires, the tires are 295/60R20 which is roughly an inch larger than factory. I have AflaOBD so I'm not worried about making the proper adjustments to the computer for the change in tire size. I also ordered new TPMS sensors to put in the new...- Kyle Defenbach
- Thread
- Replies: 5
- Forum: Exterior
-
K
High Beam LED Bulb Fitment
Hi Guys, I have a 2017 sport with projector headlights. I recently purchased low beam, high beam and fog LEDs. The low beams and fogs plug and play and work great. However, the high beam doesn't fit, you need a low profile bulb to fit into the high beam. Here are the high beam bulbs I...- Kyle Defenbach
- Thread
- Replies: 12
- Forum: Exterior
-
K
Did some wiring, now truck won't start
I have a 2017 1500 sport. Today I was wiring in some footwell lights and soldered LEDs into the existing footwell light wire. Everything went fine, lights work, but now I cant start my truck. Everything turns on, I have no messages, the OBDlink says I have zero faults. The truck turns over...- Kyle Defenbach
- Thread
- Replies: 17
- Forum: Audio & Electronics
