Search results

  1. C

    Mds replaced

    Here's a pic of big red Sent from my SM-G975U1 using Tapatalk
  2. C

    Mds replaced

    I did the mds replacement on my rebuilt hemi ram 1500 big horn It wasn't that hard at all and I'm turning 55 this year so an old guy can do it in the driveway I did do mail order parts ( not usually. But I did this time) I watched the video of a guy doing it on a charger very helpful I only had...
  3. C

    Brakes

    Why is it the first side of the brake job so damn hard!! It should b a straight up 15 min job But no...2 hours in. fml But I think I got my money's worth out of these pads..lol When I got this truck I did the front ( 8 years? ) finally the squealing got to me from the rear Sent from my...
  4. C

    Ram p 304 code

    So I had a code that said my mds wasn't responding So I cleared it and it came back a few times I called the mechanic he said bring it in in a few days I started to see if I could fix it I ordered the mds solienoids online and was trying to see if I could do the job and took the top off (...
  5. C

    Any Mcgivers?

    Kids I guess I dunno [emoji1745] I've had mine for ? 10 years? But I'm old so I put in leds I guess that f it up?? Lol I'll get er done though Sent from my SM-G975U1 using Tapatalk
  6. C

    Any Mcgivers?

    I decided to go with metal so I mcgivered a few loose screws and glued them in last night All the junk screws and stuff that was passed down to me from gramps and I shall pass on to the next king mcgiver came in handy Will continue the Frankin monster project today Sent from my SM-G975U1 using...
  7. C

    Potentially Looking at a 2016 Ram Few Questions

    Cam and lifters go around 100k I overheated mine but I am to blame for that Sent from my SM-G975U1 using Tapatalk
  8. C

    Any Mcgivers?

    2006 ram 1500 quad with the overhead lights that you push to come on Anybody fix those little tabs? And the c shaped thingy bombers that the lens fit in? Looking for ideas to fix and or modify both Cause we'll of course they are broken I have an idea to cut a small washer and put in on the...
  9. C

    Big Red over time (pic heavy)

    Got 1 They are nice! Both ways Sent from my SM-G975U1 using Tapatalk
  10. C

    Crankshaft position sensor

    Here's the update Took the truck to an auto electric expert. He found the intake was full of oil ( I quote he said it was :raining oil") so he rdid intake gasket found the wire harness that was pinched by engine and body. Took it apart and found 2 wires rubbed bare 6 inches fixed re wrapped the...
  11. C

    Crankshaft position sensor

    I'm gonna b looking at it this weekend Thanks Sent from my SM-G975U1 using Tapatalk
  12. C

    Crank shaft sensors

    The oil pressure switch prob needs to b changed out as well I'm struggling with this problem as u r Sent from my SM-G975U1 using Tapatalk
  13. C

    Need some HVAC help

    I heard somewhere you have to " burp" your system I am not sure how but mine came out ok after replacing the radiator Sent from my SM-G975U1 using Tapatalk
  14. C

    07 ram 1500 5.7 thump noise if heaters on

    Broken or detacheched spring on the door Not easy to get at btw Just turn the radio up lol Sent from my SM-G975U1 using Tapatalk
  15. C

    Speaker install

    You could cut off the blades that are on the speaker itself Or whatever connection it has Then just splice those wires to your new connectors? I dunno those are such one offs you may not have much luck with them Sent from my SM-G975U1 using Tapatalk
  16. C

    How much FRAUD can you point out in this article?

    Ha ha Must be CNN news l9l Sent from my SM-G975U1 using Tapatalk
  17. C

    Crankshaft position sensor

    I got my truck back today and didn't quite make it home and the oil pressure sensor failed Any ideas as to what's going on? Is there a wire loom for sell that I could swap it out ? It's the crankshaft and oil pressure or camshaft sensor. I figured it out because my oil Guage was zero as I...
  18. C

    Crankshaft position sensor

    I have like 6 of them What would the resistance be? Sent from my SM-G975U1 using Tapatalk
  19. C

    Crankshaft position sensor

    I think its getting oul on it I have an oil leak somewhere down there When I pulled it out it had oil on it So I'm towing back to shop that put the rebuilt engine in it to fix it Sent from my SM-G975U1 using Tapatalk
  20. C

    Crankshaft position sensor

    Hello I'm still struggling with the crankshaft sensor failing I've gone thru a few and yesterday I put a new gold standard and it lasted less then an hour! On my 06 ram 5.7 hemi I had this problem before and last year I took it back to the shop that put in a new motor and the guy just put in a...
  21. C

    Crank shaft sensors

    No No physical damage Sent from my SM-G975U1 using Tapatalk
  22. C

    Time for a new engine

    Its leaking oil The pandemic has made me wait till Now But im taking it back tomorow Its leaking oil onto the crank sensor Ive burned 4 of them in the last month Sent from my LM-Q710(FGN) using Tapatalk
  23. C

    Time for a new engine

    Did the machine shop tell you to use a wrench and crank the engine over a few time prior buttoning up? I did on my 4 banger I got a good few turns over so i could make sure the chain didnt jump It took me a few but i was able to see it and eventually correct it Sent from my LM-Q710(FGN)...
  24. C

    Led lights in bed

    Ive noticed lately the led lights i installed in the bed is making the turn signal light and tail light go dim and quirky? Just on the side that i plugged into It diddnt do it for a month or so after install Its probably a ground yeah? Or is it the flasher? Any thoughts? Sent from my...
  25. C

    Just bought a cordless impact!

    Can you get snap in online? Sent from my LM-Q710(FGN) using Tapatalk

Latest posts

Staff online

Members online

Total: 1,194 (members: 48, guests: 1,146)
Robots: 1,902

Forum statistics

Threads
195,643
Posts
2,872,842
Members
156,473
Latest member
Canacain

Share this page

Top