2013 1500 9.5" lift and 38s

[CxLxC]

I already called 3rd coast as they did my F150 with 16" but I don't want to go that extreme yet. I am more interested in 7"cst w/ 3" BL and maybe 5100 series just to level it all out. Also think I'm going to stay at the 38s for now again as the price difference between 2" is really drastic.

War machine - Did you put spacers of any kind on it? How you like the ride? Any death wobble? You regear? Programmer? Sorry just getting a run down as I am looking to order stuff after my house is done being built.

I thought I read you have a 2WD? If that's the case, the Bilsteins wont work for ya... they are for the 4x4 guys only. With that said, spacers on the 4x2's don't suffer from the death wobble problems like they do though.

And if you wanna run 38's you'll need at least some 3.92's like War Machine. I wouldn't want to be rolling those with the 3.55's (or the 3.21's for that matter, lol).

Just my .02, I'm sure someone with more knowledge than me will give a better answer than I can...

BTW- Your Ford =

 

[rolltideram]

Yea but I don't think you can put a spacer with the CST 7" lift, not sure. I will defiantly be changing the gears but i was wondering what War Machine had(now i do).

 

[CxLxC]

The CST is a 4" spindle and a 3" spacer. No, you cant compound anything else on that unless you do a BL. It all depends on how high you wanna go, which is about ~10" max with whats mostly available for our 4x2's at the moment.

edit- Sorry for the thread jack War Machine!

 

[rolltideram]

Yea War Machine sorry didnt mean to thread jack.
Yes I think the 10" is my limit which I think though means 38s are out as I dont know if they would fit, and fit i mean no rub at full crank

 

[War Machine]

Yea War Machine sorry didnt mean to thread jack.
Yes I think the 10" is my limit which I think though means 38s are out as I dont know if they would fit, and fit i mean no rub at full crank

I think you can fit them still, Robbie's truck had a 7" CST lift and 3" body with 38x15.50 Mud Grapplers on 20x12s before he did the 16" kit. I dunno about rubbing but 20x10s and 13.50s would work with a little trimming I bet

 

[rolltideram]

Yea, I wont go that wide on rim. Was thinking of 22x10, somewhere around that. And I would be most likely getting the 37x13.50 toyos...unless I go 38s lol

 

[Vancouver604]

Nice mopar brotha


Sent from my iPhone using Tapatalk