Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

17RamSXT

Junior Member
Joined
Jul 23, 2021
Posts
2
Reaction score
0
Location
Winnipeg
Ram Year
2017
Engine
5.7L
My Ram runs rough and stalls at stop signs or red lights. I scanned it and got a P0032 P0038 P0052 P0058. (02 sensors) I did a tune up on it and found a fair amount of oil in the cylinder replaced the valve cover gasket replaced the spark plugs cleared the codes truck ran good for a couple of days. Now it’s running rough and stalled once again today any advice as to what I should look for to narrow down the cause
 
Last edited:

Daw14

Senior Member
Joined
Nov 29, 2017
Posts
3,429
Reaction score
5,477
Location
South Florida
Ram Year
2014
Engine
5.7 hemi
Fair amount of oil in cylinder? What cylinder? Clarify.
 
OP
OP
1

17RamSXT

Junior Member
Joined
Jul 23, 2021
Posts
2
Reaction score
0
Location
Winnipeg
Ram Year
2017
Engine
5.7L
I removed the spark plugs from cylinder 1 on the left side and the second plug had a small amount of oil so I took a air gun blew into the cylinder and oil shot out
 
Back
Top