4inch to 6inch conversion

[DANIEL AYALA]

Is it possible to go from 4inch to 6inch on zone lift kits?? Only physical difference I see are the strut spacers and preload spacers for the springs. I'm not sure if the knuckles are different. But it looks the same lol

Anyone here done it before? If so how did you do it?

Sent from my SM-G975U1 using Tapatalk

 

[BOWERSFJ]

You could also just add Bilsteins at 2.1” setting


Sent from my iPhone using Tapatalk

 

[DANIEL AYALA]

You could also just add Bilsteins at 2.1” setting


Sent from my iPhone using Tapatalk

Very true...

Sent from my SM-G975U1 using Tapatalk

 

[BOWERSFJ]

What size lift did you get in the rear with your 4” kit ? I have Zone 4”F3”R with Bils at 1.4”


Sent from my iPhone using Tapatalk

 

[DANIEL AYALA]

What size lift did you get in the rear with your 4” kit ? I have Zone 4”F3”R with Bils at 1.4”


Sent from my iPhone using Tapatalk

I got the 3 inch coil in the rear. Same setup as yours minus bils.

Sent from my SM-G975U1 using Tapatalk

 

[BOWERSFJ]

You go 2.1” Bils, and you might want to add a 1” spacer to the rear ... Or Zone 5” rear springs, depending on the rake you want


Sent from my iPhone using Tapatalk

 

[Quick_Shifter]

All depends on your measurements now but you are right @DANIEL AYALA the Zone kits are identical