4th Gen Shocks on a 3rd Gen Ram??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

brantner22

Member
Joined
Jul 23, 2014
Posts
72
Reaction score
6
Ram Year
2003
Engine
4.7 V8
I have 4th Gen 1500 Shocks that literally have 10k miles on them from a previous truck of mine. My question is, does anyone know if they will bolt up to a 2002-2005 1500 model 3rd Gen?
 

charonblk07

Senior Member
Joined
Mar 14, 2013
Posts
4,056
Reaction score
2,072
Location
Calgary, Ab
Ram Year
2009
Engine
F1-A forged 349ci
Front/rear 2wd/4wd? You've given us almost no information.
 

LS5DodgeRam

Senior Member
Joined
Feb 17, 2013
Posts
793
Reaction score
115
Location
South Florida
Ram Year
2004
Engine
4.7L v8
Well if you got them laying around try jacking the truck up and sizing them up worst come to worse just re install your original shocks and Call it a day
 
OP
OP
B

brantner22

Member
Joined
Jul 23, 2014
Posts
72
Reaction score
6
Ram Year
2003
Engine
4.7 V8
Front/rear 2wd/4wd? You've given us almost no information.

I didn't know there was a difference in the suspension between 2wd and 4wd. I have front and rear shocks from my old 2012 4wd to put on my 2003 4wd. I lifted my 2012 and then sold it a few months ago and I still have all the factory suspension parts to it.


I'll probably just do what LS suggested and jack it up and see if they fit. I was just looking to see if anyone has done it or heard about someone else doing it before jumping in to it.
 

Trail3n

Junior Member
Joined
Nov 5, 2015
Posts
11
Reaction score
2
Location
SOUTHEAST TEXAS
Ram Year
2007 DODGE RAM 1500 4X4 LARAMIE
Engine
5.7 HEMI
I didn't know there was a difference in the suspension between 2wd and 4wd. I have front and rear shocks from my old 2012 4wd to put on my 2003 4wd. I lifted my 2012 and then sold it a few months ago and I still have all the factory suspension parts to it.


I'll probably just do what LS suggested and jack it up and see if they fit. I was just looking to see if anyone has done it or heard about someone else doing it before jumping in to it.



Did you do the install and did it work, asking mainly about the rears.
 
Top