crazywoody
Junior Member
- Joined
- Feb 1, 2016
- Posts
- 15
- Reaction score
- 13
- Ram Year
- 2014 Laramie
- Engine
- hemi 5.7
You're doing this all wrong man.. Especially posting a picture of a readylift product.
It is kinda silly to buy a 4" lift and then add spacers on top of it to acquire 1" more. If you think 35s will look small on a 6".. Then 1" less will not make a huge difference. It would make way more sense to just buy a 6" lift and be done.. Rather than stacking spacers or buying different components.
If you would take 10 mins to read up on rcx kits you will (should) change your way of thinking.
... The width of a tire doesn't change. But fine, stay with whatever tire/rim combo you want.. But you should reconsider "building" your own lift like that.
Doing a little more research and reading up will go a long ways.
IMO
Im not trying to slap together a lift kit here.. I just took a look at the bds 4 inch lift kit with the 3 inch rear spacer option and thats exactly what i was looking for..
You should do a little more research perhaps because everyone of these spacer lift kits are basically the same.. They all use a metal spacer ontop to the struts. Its different if you compare them too a full coilover setup.. Metal is metal my friend. Sure the rcx struts may be junk but im replaceing them with bilsteins any way if i was going to go that route..