6 inch bds lift and 37s rubbing issue

[canadianpipeliner]

hi there need some help. I have a 2014 1500 sport with a 6 inch bds lift with 37 in toyos mts mounted on 18x10 fuel trophys. I was wondering is anyone else running a setup similar to mine and if you had an issue. I'm pretty sure its rubbing on the pinch seam has anyone had to trim that to make big tires fit also I may have to trim the front bumper a bit.

 

[Andrew09HEMI]

Some pics may help, but the pinch weld is relatively easy... The process really is just making small cuts in the pinch weld, then folding each slit over with a BFH, spraying some type of sealant or paint to prevent rust and reinstaling the splash shield. To take it to the next step would be using a heat gun to mold the splash shield back to the newly formed pinch weld

 

[Bear 86]

i have the rough country 6 inch kit with 37s the only rubbing and cutting i've had to do is the rear inner side of the splash shield

 

[RamED]

Some rub some don't with the same size tire/lift. Generally its the wheel offset/backspacing that matters. Trimming may be minor in some cases.