6" Lift with 37s for 2013 1500 Question

[jmchugh86]

Hi guys, I'm new to the forum and just bought my first truck. 2013 Ram 1500 ST Hemi 5.7!

I want to put a 6" lift on there. I am considering the Superlift with Bilsteins. I haven't decided on a Wheel/Tire combo yet but also think 37s on a 20" rim.

Additionally, i wanted to put a Fab Fours Front Steel bumper with pre-runner and Ranch Hand Rear bumper (They are both black diamond plated)

I didnt know if, or how, the bumper could affect the wheel at all because it isn't stock.

I appreciate and thoughts or feedback on my plan here whether its the quality of the lift/ wheel/tire ideas, or the bumpers.

I am new but I wanted to get some feedback

Thanks!

 

[05christj]

I wish my pockets were that deep

 

[Reo Cook]

I plan on going with those bumpers when I save my pennies enough. You shouldn't have any issues with them

I would think as long as you clear the stock bumpers you'll be good on the aftermarket ones

 

[jmchugh86]

I wish my pockets were that deep

Hahah I've been saving long enough. It's time to spend now

 

[jmchugh86]

I plan on going with those bumpers when I save my pennies enough. You shouldn't have any issues with them

I would think as long as you clear the stock bumpers you'll be good on the aftermarket ones

Ok great. Thanks a lot. I wasn't certain how piecing together so many different company's parts would fare

 

[Rzrman328]

Subd.

 

[Mauzz]

I really like the Black Steel Elite from Fab Fours, same configuration as the ranch hand but without the diamond plate its a little cleaner for all the days I'm in the office. Post up some pics as you go along and Welcome!

 

[SilverSurfer15]

All sounds good, quality parts... you might want to add UCA if anything, although not exactly 'required'. Relatively cheap insurance, and installing during the lift makes it a breeze.

Ive never seen an aftermarket bumper that didn't provide more clearance than a stock one, so I woudlnt be too worried. Especially if its a 9-10" wheel, you wont have any problems. On a 12"+ you might, but it would probably be more on the rear fender not the front bumper.

 

[Pmexpert]

I'm running 6inch BDS lift, 20x10 rims with -18offset, 37x12.50 tires, stock bumper. no issues at all. so with aftermarket bumper you shouldn't get any problem for sure