Can I get suggestions on my gear pattern

[Ram06_1500]

I’m assuming less backlash, more shim for pinion depth? As of now it has factory shim on 3.55 pinion.

 

[muddy12]

Get the pinion depth set so it’s making contact in the center of the ring gear, then adjust carrier side-to-side to set the backlash.

Check out these pics, should give some guidance.
https://images.app.goo.gl/iDRxCsGPzASyQFfL7

Sent from my iPhone using Tapatalk

 

[Sandevino]

A little shallow for my liking.

 

[Ram06_1500]

I’m aware it’s off, I’m looking for input as far as corrective measures. Picture guides only help so much.

 

[muddy12]

Really hard to give a "Add X-inches to the pinion and Y-inches to the backlash." kind of answer online.
By comparing your pictures against the "picture guide" I posted, you need to increase the pinion depth just a bit, then readjust the backlash. It's a trial and error thing. you're going to have to adjust and recheck multiple times.