fog lights with brights

[13bighorn]

So I've been reading around a bit but haven't found anything like I'm wanting to do. I want to be able to still use my factory fog light switch to turn my fog lights on with my highbeams on. Not good at all with electrical so I didn't want to try and mess with it. I have a 2013 big horn with quad beams

 

[AustinB]

I don't think you have actually been reading around a bit for that subject. There's quite a few threads on this and a diy writeup.

Scroll through the diy section and use google a little better. Or just wait a few days and someone will pull out their spoon.

IMO

 

[sausec17]

I just googled the answer to your problem in less than 5sec

http://www.ramforum.com/f75/how_fogs_high_beams-12714/

 

[cableguy_hd]

Fog Lights with High beams on kit – The Harness Connection

this may work too

 

[bcbouy]

fiy, i found out the hard way,up here in b.c it's a ticketable offence to drive with my fog lights on if it isn't foggy.you guys might want to look into it for your areas. stupid,right??

 

[13bighorn]

Everything I read was the fog lights come on and off with your highbeams which I don't want, want the option of on or off with the highbeams on

 

[sbarron]

If you want the fogs to work with both highs and lows, AND have the option of turning them off, the most simple way would be set the circuit up as a completely separate circuit with a switch and dedicated relay. I believe you wouldn't be able to use the OEM switch as it won't have power to it on high beams.


Sent from my iPhone using Tapatalk