I installed a Linkswell Gen 4 unit in my 2015 Ram 2500 a couple years ago, it has now given up the ghost so I am going to revert to the factory 8.4 unit (6 speaker system) and have some questions about how/if I can retain some of the additional upgrades I made when installing the Linkswell.
I installed 4 ohm JL Audio speakers in the dash so I am already planning on doing the 4 ohm resistor mod on those speakers but after double checking I found that the JL Audio speakers I installed in the front and rear doors are also 4 ohm speakers. Should I do the resistor mod on them as well?
I installed an amp and 2 subs under the rear seat. I already have a switched 12V source identified for the amp after I pull the Linkswell but how do I adapt the RCAs to the 8.4 unit?
Lastly, I added a front camera and am unsure how to add that to the factory unit. While doing whatever this mod requires I would also like to be able to view the rear camera while in motion if that is possible. Hoping to take care of all of this stuff at once so I don’t need to crack into the dash multiple times.
Thanks in advance for your help and wisdom!
I installed 4 ohm JL Audio speakers in the dash so I am already planning on doing the 4 ohm resistor mod on those speakers but after double checking I found that the JL Audio speakers I installed in the front and rear doors are also 4 ohm speakers. Should I do the resistor mod on them as well?
I installed an amp and 2 subs under the rear seat. I already have a switched 12V source identified for the amp after I pull the Linkswell but how do I adapt the RCAs to the 8.4 unit?
Lastly, I added a front camera and am unsure how to add that to the factory unit. While doing whatever this mod requires I would also like to be able to view the rear camera while in motion if that is possible. Hoping to take care of all of this stuff at once so I don’t need to crack into the dash multiple times.
Thanks in advance for your help and wisdom!