Help get Silver running again!!

[Silverbullet08]

nick have you opened the cutout much?

not that much yet bc i want the cam to finish the learning process

 

[Silverbullet08]

learning it better today. drove to school and 3 out of the 5 stops it didnt stall when i came to a stop...

 

[sawcut64]

learning it better today. drove to school and 3 out of the 5 stops it didnt stall when i came to a stop...

I'm beginning to wonder about the grind on your cam. I installed a Hellfire that was supposed to be a 114 +4(like the Sidewinder), meaning a 114 LSA with 4 degrees advance ground into the cam that would put it at 110 installed. It installed at 108, if yours was similar it may be on the verge of needing a custom tune?

 

[AF_Hemi]

Kinda what I'm thinking. It should have learned it enough by now to not stall anymore. Hook up that psc Nick

 

[Silverbullet08]

have no idea how to use it...

 

[Silverbullet08]

I'm beginning to wonder about the grind on your cam. I installed a Hellfire that was supposed to be a 114 +4(like the Sidewinder), meaning a 114 LSA with 4 degrees advance ground into the cam that would put it at 110 installed. It installed at 108, if yours was similar it may be on the verge of needing a custom tune?

theres a pic of the cam card somewhere on here lol

 

[Redtruck-VA]

If the cam timing is bouderline, he can install an adjustable timing gear and roll a little retard into the cam to try to stablize the idle.

 

[Off_Road_Teacher]

have no idea how to use it...

HTC has a writeup on how to install.

 

[Silverbullet08]

u have a link? couldnt find it

 

[Off_Road_Teacher]

u have a link? couldnt find it

How To Install Your PSC1-003 - Topic Powered by Social Strata

 

[Silverbullet08]

guys lets not jumped to conclusions again. the truck is running fine. and honestly most of my driving has been on the highway. like i said everyday around town driving has been getting better so im not jumping to conclusions yet...

thanks for the link jason

 

[Off_Road_Teacher]

No problem nick.

 

[Silverbullet08]

i know its not a big mod but do u think i should get a powerwire to help things out a bit?

 

[sawcut64]

You really need to get a wideband with the PSC-1.

 

[Off_Road_Teacher]

i know its not a big mod but do u think i should get a powerwire to help things out a bit?

No, you have the psc-1.

Also, I have the part you asked me about. PM me your address and I will mail it out to you.

 

[Silverbullet08]

You really need to get a wideband with the PSC-1.

its on the list but im not getting anything else to i pay other people first...

 

[sawcut64]

Just an FYI I installed BV heads on someone's truck a couple weeks back(about 300 miles ago) and he was having issue's after he went to the drag strip. Ran great before but on the last run began to run like *** and wouldn't hold an idle, much like yours did. He got home ready to yank his valve covers thinking he broke a spring or something, turned out one of his torque tubes fell off at the strip and that was causing all his problems. Can't stress enough how important the exhaust is and how dramatically it effects how your truck runs.

 

[Silverbullet08]

still having stalling issues. ive got about 530 miles on it since the cam install

 

[KGBIGCOUNTRY]

Man I wonder what your A/F is looking like. If its stalling alot and the air and fuel are far off your gonna do damage to your motor.

 

[Silverbullet08]

driving around town or on the highway it is fine. it will only stall when i come to a stop. i told teach where my lfts were at and they were around his so i assume its ok but idk.