Is 2" lift enough for 34 tire? How is Mopar lift kits?

[speedneo]

Right now I have 1500 factory stock 17" wheel with 265 tire. I am goinh to get 17" aftermarket wheels but with bigger tires. Thinking 34. Is 2” lift enough? Looking at 2” Lift Kit w/ Premium Bilstein Struts and Shocks. Is it a good choice?

 

[mmwaggie]

Pretty sure some guys fit 35s with bilstein level. You could probably fit 34s at stock ride height but level it too look good.

 

[BigSexyBlue05]

I think it depends on the wheel fitments. I have 20x10 35's -12 offset, rubbed witha 2" level. I did procomps 2.75 level, problem solved

 

[speedneo]

I think I wont go more than -5 offset

I think it depends on the wheel fitments. I have 20x10 35's -12 offset, rubbed witha 2" level. I did procomps 2.75 level, problem solved

 

[h2oman]

Ran 34's for two years on my Bilsteins at 2.8

 

[quietpeen]

yes it can fit

 

[homebrew]

Bils at 2.1 running 34s on stock wheels

 

[speedneo]

What is your stock tires size? you leveled front only? What is your wheels offset? Thanks

Bils at 2.1 running 34s on stock wheels

 

[chipmaker]

Bils @ 2.1" 35s on stockers...

 

[MojoRising]

Bils @ 2.1" 35s on stockers...

Any issues with the ball joints that I have been hearing about with the 2014 and the level kit?

 

[chipmaker]

Any issues with the ball joints that I have been hearing about with the 2014 and the level kit?

Only time will tell. I do plan on a 4" or 6" RCX lift within a few months. I do look at the ball joints on occasion.

 

[homebrew]

Stock tire size was 275/60/20 went to a 275/65/20. I have about a thousand miles on my level (front only) no issues thus far.

 

[Kurt E]

Your title asks about Mopar lift as an option. The Mopar Lift is a rebadged Superlift. I dont have any experience...just internet knowledge.

 

[speedneo]

Do you know what is the original brand Mopar rebadged?

Your title asks about Mopar lift as an option. The Mopar Lift is a rebadged Superlift. I dont have any experience...just internet knowledge.

 

[Bravo1]

Super lift part number is K4600.