Jack stands

[Hardracer]

I was also gonna say...not harbor freight...recalls.
I also noticed the 3 tons are to short

 

[Dusty]

They work excellent. Nothing short of a M1 Abrams is collapsing these!
View attachment 518770

Impressive!

Regards,
Dusty
2019 Ram 1500 Billet Silver Laramie Quad Cab 2WD, 5.7 Hemi, 8HP75, 3.21 axle, 33-gallon fuel tank, factory dual exhaust, 18” wheels. Build Date: 3 June 2018. Now at 87418 miles.

 

[mdc1990zr1]

They work excellent. Nothing short of a M1 Abrams is collapsing these!
View attachment 518770

They look great! Would you care to share your dimensions on those? Thank you!

 

[ThunderMug95]

They look great! Would you care to share your dimensions on those? Thank you!

Trying to recall. I believe the base is 4’ and I used 3- 8’ lengths total of 2x10’s, no leftovers. (2-48”)(2-36”/ 2-12”) (2-30”/ 2-18”) maybe? Construction adhesive + screws.
I had to keep it long because when I built them, we had a C-5 vette. (Had to use another board for that too.)
I only have to use it for the wife’s suv now…my truck has enough lift I can get under it now fairly easy

 

[mdc1990zr1]

Trying to recall. I believe the base is 4’ and I used 3- 8’ lengths total of 2x10’s, no leftovers. (2-48”)(2-36”/ 2-12”) (2-30”/ 2-18”) maybe? Construction adhesive + screws.
I had to keep it long because when I built them, we had a C-5 vette. (Had to use another board for that too.)
I only have to use it for the wife’s suv now…my truck has enough lift I can get under it now fairly easy

Close enough! Thank you. Judging by the 21" garage door section and the dolly used to haul them, that looks correct. My last vette was a C-4 ZR-1 as my signature.

 

[Wild one]

Trying to recall. I believe the base is 4’ and I used 3- 8’ lengths total of 2x10’s, no leftovers. (2-48”)(2-36”/ 2-12”) (2-30”/ 2-18”) maybe? Construction adhesive + screws.
I had to keep it long because when I built them, we had a C-5 vette. (Had to use another board for that too.)
I only have to use it for the wife’s suv now…my truck has enough lift I can get under it now fairly easy

I made mine out of a piece of 3/4" plywood Craig,that way the steps are pretty small,and i can drive pretty well anything up on them with-out worry'ing

 

[ThunderMug95]

I made mine out of a piece of 3/4" plywood Craig,that way the steps are pretty small,and i can drive pretty well anything up on them with-out worry'ing

That works. I had 2 of the boards leftover/unused from another project and decided I would do something with them.

 

[Dan Topp]

I use these automatic lifter thingys my wife gave me for giving her the night off

 

[Wild one]

That works. I had 2 of the boards leftover/unused from another project and decided I would do something with them.

Same here,i had several smaller pieces of treated 3/4" plywood laying around from a shed project. I even made up 2 that hook onto my 6" plastic ramps,so the ramps don't try to slide on the concrete when i'm driving a car up on them,and give me a little more front bumper clearance

 

[Wild one]

I use these automatic lifter thingys my wife gave me for giving her the night offView attachment 519294View attachment 519293

I'm adoptable Dan if she's interested in adopting another older kid

 

[Dan Topp]

I'm adoptable Dan if she's interested in adopting another older kid

I have been the downfall of many older kids